who is the itsp? On Fri, Sep 23, 2011 at 11:18 AM, Max DiOrio <[email protected]> wrote:
> Yes, it is a 2.0 install. pfSense said that it can’t be the QoS causing > the problems as it doesn’t show any dropped packets for the queues, so I’m > not overflowing them.**** > > ** ** > > I have UDP 30000-31000, UDP 5080, TCP/UDP 5060 NAT’d to the sipX server. I > believe I followed your wizard when I set this up back in August. Have you > updated it at all?**** > > ** ** > > With choppy audio and dropped calls I’m not sure how it would be a port > problem. I would think port problems would manifest themselves as no > audio/no connection issues.**** > > ** ** > > **** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Tony Graziano > *Sent:* Friday, September 23, 2011 11:05 AM > *To:* Discussion list for users of sipXecs software > *Subject:* Re: [sipx-users] pfSense QoS**** > > ** ** > > pfsense does floating rules but my guess is not all of the ports are > properly specified. Is this a 2.0 install? If so, you might want my new > wizard for setting that up.**** > > On Fri, Sep 23, 2011 at 10:57 AM, Max DiOrio <[email protected]> > wrote:**** > > I was hoping someone can take a quick look at my QoS settings and let me > know if anything is off. My users are complaining that they’re having > choppy audio and an occasional dropped call. Our ITSP/ISP says everything > is fine on their end. The QoS settings were tweaked by pfSense. We have a > DSL connection that’s supposed to be 9/1.5**** > > **** > > I’m just trying to figure out a way to pin the troubles back on the > ITSP/ISP.**** > > **** > > <shaper>**** > > <queue>**** > > <interface>lan</interface>**** > > <name>lan</name>**** > > <scheduler>HFSC</scheduler>**** > > <bandwidth/>**** > > <bandwidthtype/>**** > > <enabled>on</enabled>**** > > <queue>**** > > <name>qLink</name>**** > > <interface>lan</interface>**** > > <qlimit>500</qlimit>**** > > <priority>2</priority>**** > > <bandwidth>20</bandwidth>**** > > <bandwidthtype>%</bandwidthtype>**** > > <enabled>on</enabled>**** > > <default>on</default>**** > > <ecn>on</ecn>**** > > </queue>**** > > <queue>**** > > <name>qInternet</name>**** > > <interface>lan</interface>**** > > <bandwidth>9</bandwidth>**** > > <bandwidthtype>Mb</bandwidthtype>**** > > <enabled>on</enabled>**** > > <ecn>on</ecn>**** > > <linkshare3>9Mb</linkshare3>**** > > <linkshare>on</linkshare>**** > > <upperlimit3>9Mb</upperlimit3>**** > > <upperlimit>on</upperlimit>**** > > <queue>**** > > <name>qACK</name>**** > > <interface>lan</interface>**** > > <priority>6</priority>**** > > <bandwidth>19.48</bandwidth>**** > > <bandwidthtype>%</bandwidthtype>**** > > <enabled>on</enabled>**** > > <ecn>on</ecn>**** > > <linkshare3>19.48%</linkshare3>**** > > <linkshare>on</linkshare>**** > > </queue>**** > > <queue>**** > > <name>qVoIP</name>**** > > <interface>lan</interface>**** > > <priority>7</priority>**** > > <bandwidth>32</bandwidth>**** > > <bandwidthtype>Kb</bandwidthtype>**** > > <enabled>on</enabled>**** > > <ecn>on</ecn>**** > > <realtime3>240Kb</realtime3>**** > > <realtime>on</realtime>**** > > </queue>**** > > </queue>**** > > </queue>**** > > <queue>**** > > <interface>wan</interface>**** > > <name>wan</name>**** > > <scheduler>HFSC</scheduler>**** > > <bandwidth>1572</bandwidth>**** > > <bandwidthtype>Kb</bandwidthtype>**** > > <enabled>on</enabled>**** > > <queue>**** > > <name>qACK</name>**** > > <interface>wan</interface>**** > > <priority>6</priority>**** > > <bandwidth>19.602</bandwidth>**** > > <bandwidthtype>%</bandwidthtype>**** > > <enabled>on</enabled>**** > > <ecn>on</ecn>**** > > <linkshare3>19.602%</linkshare3>**** > > <linkshare>on</linkshare>**** > > </queue>**** > > <queue>**** > > <name>qDefault</name>**** > > <interface>wan</interface>**** > > <priority>3</priority>**** > > <bandwidth>9.801</bandwidth>**** > > <bandwidthtype>%</bandwidthtype>**** > > <enabled>on</enabled>**** > > <default>on</default>**** > > <ecn>on</ecn>**** > > </queue>**** > > <queue>**** > > <name>qVoIP</name>**** > > <interface>wan</interface>**** > > <priority>7</priority>**** > > <bandwidth>32</bandwidth>**** > > <bandwidthtype>Kb</bandwidthtype>**** > > <enabled>on</enabled>**** > > <ecn>on</ecn>**** > > <realtime3>240Kb</realtime3>**** > > <realtime>on</realtime>**** > > </queue>**** > > </queue>**** > > </shaper>**** > > **** > > **** > > **** > > **** > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/**** > > > > **** > > ** ** > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.465.6833 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Contract Customers: > http://support.myitdepartment.net**** > > ** ** > > Blog:**** > > http://blog.myitdepartment.net**** > > ** ** > > Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4*** > * > > ** ** > > Ask about our Internet faxservices!**** > > ** ** > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net <http://support.myitdepartment.net>Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet faxservices!
<<image001.jpg>>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
