The ITSP's handle that with Concurrent Call Sessions. You can receive multiple calls to the same number. How the PBX responds to that is another thing.
Let's not confuse line hunting with hunt groups. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Saturday, November 19, 2011 11:52 AM To: sipx-users Subject: [sipx-users] SIP Hunt Group Does anyone know if any SIP trunk providers offer hunt groups. I found a post from a couple of months back where someone was asking about this but it didn't seem to lead to any answer. Sipx cannot do this on it's own as far as I understand this, it needs to be programmed at the providers end. Example, 6 line hunt group in a small office. A call comes in on the main number, the receptionist transfers the call to someone. The main number needs to be freed up again in order for another incoming call, up to say 6 simultaneous callers. This is a typical situation where an office has a hunt group or sometimes called 'rotary' service but in this case, I need to use a SIP provider such as voip.ms or flowroute. Neither of which appear to offer these services. Thanks for any input you can provide. Mike _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
