I've used Broadvox with customers for over three years. I can't recall an out of service for any of my customers on their network. They have built a carrier grade network, 5 9's availability.
I've used VOIP.ms for three years as well - but can't say the same about their reliability. They are cost effective, that is what I use them for. If you need a circuit to feed sipXecs for all of your trunking needs, with DID, I can recommend Broadvox for that service, and have no regrets over the quality of service you will get from them. However, the circuit between your system location and Broadvox - that is where any issues you might have will come from. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, December 29, 2011 3:05 PM To: sipx-users Subject: Re: [sipx-users] flowroute VPRI IP authentication >flowroute does not control > the majority of their network and hence, RTP does not come from the >same IP as the gateway. You pretty much have to open everything to use >flowroute if I've seen plenty of posts from folks asking which ITSP might be better over another but what about for resiliency in terms of setting up a sipx bos to use nothing but an ITSP. Are any preferred here which do have good load balancing and very good uptimes. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
