I won't touch the subject of VPRI because it is not relevant to the actual issue. All there is to it are INVITES and REGISTERS that are either authenticated via user name or password or via an ACL which we here call IP Auth. What receives them on the other end can have any name it wants. What is not clear to me and I am honestly confused what you mean by "authenticate once based on IP over a user name/password". Would you mind giving a call flow to enlighten me?
On 12/30/2011 06:10 AM, [email protected] wrote: > I need to install 4 separate sipx systems in four separate locations. No > interoffice communications. > All of the sipx systems could benefit from the use of a VPRI rather than > traditional. > > I use ITSP's for individual lines when we need an area code that our local > telco cannot handle. > On sipx, I usually just create an ITSP device in the gateway section and let > it authenticate via user name/password. > > In this case, due to the number of lines per server (4 to 8), it doesn't seem > like a good idea to authenticate each and every DID individually for example > and would prefer using an IP based authentication for the whole server. > > I'll be using flowroute for the systems but am not sure how to configure sipx > to authenticate once based on IP over a user name/password. I don't see > anything which would allow me to do this in the Gateway configuration section. > > Can someone shed some light on this please. > > Thanks very much. > > Mike > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
