URL call is disabled. Means the phone is not registered. You can see this in DIAGNOSTICS>REGISTRATIONS.
If noone can call in you also have a proxy issue. Explain how the calls come in (PSTN or ITSP). Review the system activity (top) and see if you are using SWAP. Do you use sipxbridge for trunking? Do you support remote workers? Restarting the services does you no real service because you will have less of a chance to fiure out "why" the calls are failing. Assuming you are running 4.4 latest-stable and have at least 4GB ram in the system... On Wed, Jan 25, 2012 at 10:26 AM, Brian Snoddy <[email protected]> wrote: > I am new to sipxecs and VOIP. I setup our server here in September and > everything has worked fine until recently. Everything will work fine for > about a day then when you pick up the Phones (polycom 650s) they say URL > Call is disabled and when a customer calls in they get a busy signal. Any > suggestions? > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
