As long as the telco and your gateway agree on the standards and protocols used it should not be a problem. On Feb 9, 2012 4:22 PM, "Becker, Jesse" <[email protected]> wrote:
> Josh, > My first SipX related project was at Houghton college. I had to connect > Sipx to the Option 81 that I managed and had to do the same. At Ulster, we > are currently getting name and number with ESS5 from PAETEC. So I would > assume we should be able to stick to that standard when we move from Cisco > UCM to SipX. > > Thanks, > > Jes > > On Thu, Feb 9, 2012 at 2:48 PM, Josh Patten <[email protected]> wrote: > >> The only time I had to actually "pick" one of the signalling methods was >> when I was connecting to an old Nortel Option 61c that didn't have advanced >> Q.SIG. DMS-100(Nortel) was the only method I could seem to get internal >> name and number to pass through. >> >> Otherwise, it's really a matter of what the PRI provider supports. >> >> On Wed, Feb 8, 2012 at 4:56 PM, Becker, Jesse <[email protected]>wrote: >> >>> All, >>> What is the best PRI standard to use with AudioCodes M1000s to allow >>> calling number and name? We currently use ESS5 with our Cisco gear. Will >>> this standard also work with the M1000s and SIPX or should we be looking >>> into another standard such as NI2? >>> >>> Thanks, >>> >>> Jes >>> >>> _______________________________________________ >>> sipx-users mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >> >> >> >> -- >> Josh Patten >> eZuce >> Solutions Architect >> O.978-296-1005 X2050 >> M.979-574-5699 >> http://www.ezuce.com >> >> >> ------------------------------------------------------------------------------------------------------------ >> Hope to see you at the sipX CoLab! http://www.sipfoundry.org/sipx-colab >> A gathering for - open source users, eZuce customers & eZuce partners >> Get the inside track on 4.6 and a glimpse at the future of sipXecs! >> >> >> _______________________________________________ >> sipx-users mailing list >> [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > > -- > > > Jesse Becker | Technical Manager > Network+ | Linux+ Certified Professional > DATATEL+SGHE @ SUNY Ulster > 491 Cottekill Road, Stone Ridge, NY 12484 > Tel 845-687-5064 | Fax 845-687-5105 > [email protected] | www.sunyulster.edu > > <http://www.sunyulster.edu/> > > Check out our knowledge base: > http://kb.sunyulster.edu<http://kb.sunyulster.edu/> > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
