Might try running 5.6 or 5.8 code to see if that helps. No reason for it, but I haven't been running the 6.x code. Mainly because I haven't seen anyone state they are working with no issues on it, and I've seen that on the 5.6 and 5.8 code.
From: [email protected] [mailto:[email protected]] On Behalf Of Tony Graziano Sent: Tuesday, March 20, 2012 12:32 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Audiocodes MP118 487 Request Terminated Do you have an internal dns table setup on the gateway? I would turn up the logging level on the gateway and review that to see where it leads you. On Mar 20, 2012 3:27 PM, "Jorge E. Fernandez" <[email protected]> wrote: Im experiencing an issue with apparently random calls where they go straight busy tone... It only happens on about 50% of calls that go out through the gateway. When I trace the calls the gateway returns a "487 Request Terminated" after the INVITE and when I go through the syslog from the gateway I find this error while its handling the invite ( lgr_stk_ses)(10026 ) !! [ERROR] SIPStackSession::HandleStackSetupEV failed because no remote IP The audiocodes is running firmware 6.0 and im running SipXecs 4.4... The weird thing is that nothing changes from call to call its just that some go through and some don't. Internal calling is working properly. Help is greatly appreciated. Regards, -- Jorge E. Fernandez IT Specialist J9 IT Consultants [email protected] http://j9consultants.com - @jef2904 _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
