Do you have an account with AudioCodes. You should be able to download from them. Rob From: [email protected] [mailto:[email protected]] On Behalf Of Jorge E. Fernandez Sent: Tuesday, March 20, 2012 5:00 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Audiocodes MP118 487 Request Terminated Where can I get version 6.0? -- Jorge On Mar 20, 2012, at 4:14 PM, Mark Wood wrote:
Version 6.2.xxxxx has given us all kinds of problems. We always downgrade to a 6.0 version Thanks, Mark W. Wood office: (760)202-0224 X2010 Direct: (760)459-1981 <image001.png> www.redphonetech.com From: Jorge E. Fernandez [mailto:[email protected]] Sent: Tuesday, March 20, 2012 12:53 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Audiocodes MP118 487 Request Terminated Im running an even higher version Version ID: 6.20.A022.003 DSP Type: 0 DSP Software Version: 62008 DSP Software Name: 204IM Flash Version: 199 -- Jorge On Mar 20, 2012, at 3:49 PM, Robert Schroeder wrote: Just for information purposes. This is the device information for the AudioCodes Mediant 1000 device that we are using with three PRI circuits on trunk modules. Version ID: 6.00A.032.003 DSP Type: 2 DSP Software Version: 60008 DSP Software Name: 624AE3 Flash Version: 208 Rob From: [email protected] [mailto:[email protected]] On Behalf Of Todd Hodgen Sent: Tuesday, March 20, 2012 3:43 PM To: 'Discussion list for users of sipXecs software' Subject: Re: [sipx-users] Audiocodes MP118 487 Request Terminated Might try running 5.6 or 5.8 code to see if that helps. No reason for it, but I haven't been running the 6.x code. Mainly because I haven't seen anyone state they are working with no issues on it, and I've seen that on the 5.6 and 5.8 code. From: [email protected] [mailto:[email protected]] On Behalf Of Tony Graziano Sent: Tuesday, March 20, 2012 12:32 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Audiocodes MP118 487 Request Terminated Do you have an internal dns table setup on the gateway? I would turn up the logging level on the gateway and review that to see where it leads you. On Mar 20, 2012 3:27 PM, "Jorge E. Fernandez" <[email protected]> wrote: Im experiencing an issue with apparently random calls where they go straight busy tone... It only happens on about 50% of calls that go out through the gateway. When I trace the calls the gateway returns a "487 Request Terminated" after the INVITE and when I go through the syslog from the gateway I find this error while its handling the invite ( lgr_stk_ses)(10026 ) !! [ERROR] SIPStackSession::HandleStackSetupEV failed because no remote IP The audiocodes is running firmware 6.0 and im running SipXecs 4.4... The weird thing is that nothing changes from call to call its just that some go through and some don't. Internal calling is working properly. Help is greatly appreciated. Regards, -- Jorge E. Fernandez IT Specialist J9 IT Consultants [email protected] http://j9consultants.com - @jef2904 _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net NOTICE: This electronic mail message and any content within it are intended exclusively for the individual(s) or entities to which it is addressed. The message, together with any attachments and all other content, may contain confidential and/or privileged information. Any unauthorized review, use, print, save, copy, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ NOTICE: This electronic mail message and any content within it are intended exclusively for the individual(s) or entities to which it is addressed. The message, together with any attachments and all other content, may contain confidential and/or privileged information. Any unauthorized review, use, print, save, copy, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
