Hello,
The system details are: Computer: Dell Dimension C521 Bios Version: 1.1.11 Processor: AMD Athlon 64 X2 Dual Core Processor 3600+, 1.9 GHZ, Bus Speed 1000MHZ, L2 Cache 1MB, 64 Bit Technology=yes RAM: 3GB DDR2 SDRAM (667MHZ) Hard Drive: 80GB SATA Thank You for the help, James M. Jones Project Manager InSysPro, LLC M. 954-557-2771 [email protected] Description: cid:[email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Douglas Hubler Sent: Thursday, October 04, 2012 9:24 AM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] SIPXEC crashes after install On Thu, Oct 4, 2012 at 9:19 AM, James M. Jones <[email protected]> wrote: Good Day, I'm currently working with version 4.4.4.0. I've installed it on an older Dell Dimension C521 with an AMD Athlon Processor (64X2 Dual Core, 1.9GHZ) and 3GB of RAM. The installation works fine and upon completion, I can access the GUI and start the initial configuration, but shortly after, the system will crash. I've left the system at the initial configuration after installation (Only changed the superadmin password), but it will still crash. If I'm directly connected to the box, the screen becomes unreadable or goes blank. Upon restart, the system freezes and the screen goes blank when it tries to load udep. I've reinstalled it 4 times now without errors. I've just recently started working with SIPXEC and any suggestions are greatly appreciated. Suggestions: - use sipxecs 4.6. it's more stable in this regard. - for an issue like this, report full system details: CPU, disk, RAM, ....
<<image001.jpg>>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
