I would suggest looking at the hardware as well. I run sipxecs 4.4 as a demo system on a laptop with smaller processor and 2gb memory without issue. It is very stable, and I suspect your issue is more related to a hardware issue.
Additionally, I have it running on at least a dozen machines with dual core, and 2gb memory with no issues today. I think you will find that to be a very stable environment. The demo laptop was used at COLAB 2012 to demonstrate Voice Operator Panel and Polycom phones. You will see it running again with 4.6 at COLAB 2013. If you haven't registered for Colab - now is a great time to take advantage of the registration discounts! http://www.sipfoundry.org/sipx-colab From: [email protected] [mailto:[email protected]] On Behalf Of Trevor L Benson Sent: Thursday, October 04, 2012 8:02 AM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] SIPXEC crashes after install James, These type of problems generally point to hardware issues or corrupted OS install possibly exacerbated by sipXecs starting to load up memory into Java and eat up CPU cycles. Did you happen to check the MD5 sum of the ISO before burning or using it for installation? Did you take the time to test the CD during install to ensure it was clean? If you already did these things then I would definitely suggest memtest86+ and even a burn in / stress test software to ensure something besides memory (like CPU) isn't the cause. Maybe Douglas or another has more experience with sipXecs crashing the entire server, but I personally have not seen that happen in a stable release of sipXecs from 4.0 through 4.4. Thanks, Trevor Benson, Network Engineer A1 Networks On Oct 4, 2012, at 6:19 AM, James M. Jones <[email protected]> wrote: Good Day, I'm currently working with version 4.4.4.0. I've installed it on an older Dell Dimension C521 with an AMD Athlon Processor (64X2 Dual Core, 1.9GHZ) and 3GB of RAM. The installation works fine and upon completion, I can access the GUI and start the initial configuration, but shortly after, the system will crash. I've left the system at the initial configuration after installation (Only changed the superadmin password), but it will still crash. If I'm directly connected to the box, the screen becomes unreadable or goes blank. Upon restart, the system freezes and the screen goes blank when it tries to load udep. I've reinstalled it 4 times now without errors. I've just recently started working with SIPXEC and any suggestions are greatly appreciated. Thank You James M. Jones Project Manager InSysPro, LLC M. 954-557-2771 [email protected] <image001.jpg> _______________________________________________ sipx-users mailing list <mailto:[email protected]> [email protected] List Archive: <http://list.sipfoundry.org/archive/sipx-users/> http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
