Hello Trevor,
Thank You for the tips. I have ran the memtest and a few stress tests. I didn't check the MD5 sum before the first install, but I did check through the install and didn't receive any errors. I've just done a few fresh downloads and checked the MD5 sum and they have all mismatched. I'm downloading from: http://download.sipfoundry.org/pub/sipXecs/ISO/ Both the 4.4.0 i386 and X86 images have mismatches. Thank You, James James M. Jones Project Manager InSysPro, LLC M. 954-557-2771 [email protected] Description: cid:[email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Trevor L Benson Sent: Thursday, October 04, 2012 11:02 AM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] SIPXEC crashes after install James, These type of problems generally point to hardware issues or corrupted OS install possibly exacerbated by sipXecs starting to load up memory into Java and eat up CPU cycles. Did you happen to check the MD5 sum of the ISO before burning or using it for installation? Did you take the time to test the CD during install to ensure it was clean? If you already did these things then I would definitely suggest memtest86+ and even a burn in / stress test software to ensure something besides memory (like CPU) isn't the cause. Maybe Douglas or another has more experience with sipXecs crashing the entire server, but I personally have not seen that happen in a stable release of sipXecs from 4.0 through 4.4. Thanks, Trevor Benson, Network Engineer A1 Networks On Oct 4, 2012, at 6:19 AM, James M. Jones <[email protected]> wrote: Good Day, I'm currently working with version 4.4.4.0. I've installed it on an older Dell Dimension C521 with an AMD Athlon Processor (64X2 Dual Core, 1.9GHZ) and 3GB of RAM. The installation works fine and upon completion, I can access the GUI and start the initial configuration, but shortly after, the system will crash. I've left the system at the initial configuration after installation (Only changed the superadmin password), but it will still crash. If I'm directly connected to the box, the screen becomes unreadable or goes blank. Upon restart, the system freezes and the screen goes blank when it tries to load udep. I've reinstalled it 4 times now without errors. I've just recently started working with SIPXEC and any suggestions are greatly appreciated. Thank You James M. Jones Project Manager InSysPro, LLC M. 954-557-2771 [email protected] <image001.jpg> _______________________________________________ sipx-users mailing list <mailto:[email protected]> [email protected] List Archive: <http://list.sipfoundry.org/archive/sipx-users/> http://list.sipfoundry.org/archive/sipx-users/
<<image001.jpg>>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
