What he said :-) > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Andrea Righi > Sent: Wednesday, June 07, 2006 15:01 > To: [email protected] > Cc: [EMAIL PROTECTED] > Subject: Re: [Sisuite-users] boot issue on Proliant with cciss array > > The cciss issue should be fixed in 3.7.3. It was an udev > rules problem, > so the kernel should be ok. > > Cheers, > -Andrea > > Bernard Li wrote: > > If you want to rebuild the systemimager kernel, then yes > you need the > > source. > > > > For UYOK, it should be included in SystemImager 3.6.3, but > it does not > > work as well as in the upcoming development release (3.7.3). > > > > BTW, if you are looking for more interactive response, > please feel free > > to join us at #sisuite at irc.freenode.net. > > > > Cheers, > > > > Bernard > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > >> Sent: Wednesday, June 07, 2006 14:46 > >> To: Bernard Li > >> Cc: [EMAIL PROTECTED]; [email protected] > >> Subject: Re: [Sisuite-users] boot issue on Proliant with > cciss array > >> > >> > >> Do these changes require me to have the systemimager source? > >> Currently I use the binary provided by Debian. > >> > >>> I think the kernel config option is: > >>> > >>> CONFIG_BLK_CPQ_CISS_DA > >>> > >>> so change that from "m" to "y". The config file resides in > >>> patches/linux.<arch>.config > >>> > >>> Anyways, perhaps another solution is to use UseYourOwnKernel - I'd > >>> search the mailing-list archives for instructions on how to > >> use it... > >>> Cheers, > >>> > >>> Bernard > >>> > >>>> -----Original Message----- > >>>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > >>>> Sent: Wednesday, June 07, 2006 13:51 > >>>> To: [email protected] > >>>> Cc: Bernard Li > >>>> Subject: Re: [Sisuite-users] boot issue on Proliant with > >> cciss array > >>>> > >>>> version 3.6.3-2 > >>>> > >>>> I'm not sure what to patch. The cciss module is actually > >>>> there in the standard i386 boot image as a module, it just > >>>> needs to be automatically loaded if there is a controller > >>>> present. Otherwise it can be compiled into the kernel by > >>>> changing the answer under Device Drivers ---> Block devices > >>>> ---> Compaq Smart Array 5xxx support from "m" to "y" Note > >>>> that this module does support the 5i and the very latest 6i > >>>> controllers on the Proliants. > >>>> > >>>>> Which version of SystemImager are you using? And can you > >>>> send along a > >>>>> patch for linux.config so that we can perhaps apply it to > >>>> trunk (if it's > >>>>> not already there)? > >>>>> > >>>>> Thanks, > >>>>> > >>>>> Bernard > >>>>> > >>>>>> -----Original Message----- > >>>>>> From: [EMAIL PROTECTED] > >>>>>> [mailto:[EMAIL PROTECTED] On > >>>>>> Behalf Of [EMAIL PROTECTED] > >>>>>> Sent: Wednesday, June 07, 2006 13:19 > >>>>>> To: [email protected] > >>>>>> Subject: [Sisuite-users] boot issue on Proliant with > >> cciss array > >>>>>> > >>>>>> the stock boot image does not contain support for the Compaq > >>>>>> SmartArray controller found on many Proliant series systems. > >>>>>> I created an autoinstallcd based on the kernel of the golden > >>>>>> client that does support this controller, but at boot it > >>>>>> fails. It looks like the typical sort of error when the root > >>>>>> fs cannot be mounted, complaining about init... > >>>>>> > >>>>>> Any ideas what to do? Is there either a simple way to enable > >>>>>> support for the cciss module in the standard i386 boot image? > >>>>>> Otherwise, is there some special requirement for the custom > >>>>>> kernel to work with the autoinstallcd? > >>>>>> > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Sisuite-users mailing list > >>>>>> [email protected] > >>>>>> https://lists.sourceforge.net/lists/listinfo/sisuite-users > >>>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> Sisuite-users mailing list > >>>>> [email protected] > >>>>> https://lists.sourceforge.net/lists/listinfo/sisuite-users > >>>> -- > >>>> .. Synthetic a-priori judgements should not be patentable .. > >>>> > >> -- > >> .. Synthetic a-priori judgements should not be patentable .. > >> > > > > > > _______________________________________________ > > Sisuite-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/sisuite-users > > > > > _______________________________________________ > Sisuite-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sisuite-users >
_______________________________________________ Sisuite-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sisuite-users
