Strange indeed. What version of CdC are you running? At times the V3 telescope control has be broken. I just tried on 2,76 and 3.1 and connected right up. Also are you running the old Meade Ascom driver or the modified one that supports the pulse guide? Mine is the pulse guide one. Should not make a connection difference. I have exactly the opposite problem with AstroPlanner. I can connect via BT-Aircable using ASCOM with AP but not using AP native Meade drivers and BT. AP connect fine hardwired serial ASCOM or native AP driver. Maybe someone on the ASCOM board can tell what the error message is about. Bob
--- In [email protected], "Steve Berte" <atnbe...@...> wrote: > > Downloaded and installed the Helper.NET program. It ran with no problems. > Restarted computer just to play it safe. > > Double checked to ensure BT was working by connecting to scope via non-ASCOM > drivers in TheSky6 and Astroplanner. No problem connecting. Disconnected > and closed other programs. > > Started CdC and set up telescope (CPC1100). Set to COM4 which is what my BT > connects through via the USB to serial emulator and what the other programs > successfully used. When I hit "Connect" I now get the error message "Object > reference not set to an instance of an object". > > ??? > >
