Para o wicd funcionar, vc tem q seguir o que está escrito no README.SLACKWARE na pasta do wicd, Seguem alguns trechos importantes:
- chmod +x /etc/rc.d/rc.wicd; /etc/rc.d/rc.wicd start - Remova todas as entradas referentes ao wlan0 no /etc/rc.d/rc.inet1.conf - O usuário que vai usar o wicd tem que fazer parte do grupo netdev Recomendo um reboot apos fazer os ajustes acima para garantir que tido foi devidamente carregado. On Wed, Nov 23, 2011 at 11:13 PM, joseph <[email protected]> wrote: > Mas o wicd não achou > > > Em 23-11-2011 22:03, Ellington Santos escreveu: >> >> Esse arquivo deveria existir. Creio q o pacote >> modules-smp-2.6.37.6_smp-i686-2.txz que você instalou estava >> corrompido. >> >> >> >> wget >> ftp://ftp.osuosl.org/pub/slackware/slackware-13.37/slackware/a/kernel-modules-smp-2.6.37.6_smp-i686-2.txz >> installpkg kernel-modules-smp-2.6.37.6_smp-i686-2.txz >> modprobe rtl8187 >> ifconfig -a >> dmesg | tail >> tail /var/log/messages >> >> >> >> >> On Wed, Nov 23, 2011 at 10:59 PM, joseph<[email protected]> wrote: >>> >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# ls >>> /lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/rtl818x/rtl8187.ko >>> ls: impossível acessar >>> /lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/rtl818x/rtl8187.ko: >>> Arquivo ou diretório não encontrado >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# ls >>> /lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/rtl818x/rtl8187.ko >>> ls: impossível acessar >>> /lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/rtl818x/rtl8187.ko: >>> Arquivo ou diretório não encontrado >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> >>> >>> >>> Em 23-11-2011 21:58, Ellington Santos escreveu: >>> >>> ls >>> /lib/modules/2.6.37.6-smp/kernel/drivers/net/wireless/rtl818x/rtl8187.ko >>> >>> Parece que esse módulo não existe. >>> >>> >>> On Wed, Nov 23, 2011 at 10:40 PM, joseph<[email protected]> wrote: >>> >>> bash-4.1# >>> bash-4.1# cat /etc/slackware-version >>> Slackware 13.37.0 >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# uname -a >>> Linux Jose-notebook 2.6.37.6-smp #2 SMP Sat Apr 9 23:39:07 CDT 2011 i686 >>> Pentium(R) Dual-Core CPU T4200 @ 2.00GHz GenuineIntel GNU/Linux >>> bash-4.1# >>> >>> >>> >>> >>> Em 23-11-2011 21:35, Ellington Santos escreveu: >>> >>> Bom, vc não tem o módulo rtl8187. >>> >>> >>> Mais dois comandos: >>> >>> >>> cat /etc/slackware-version >>> uname -a >>> >>> >>> >>> >>> On Wed, Nov 23, 2011 at 9:56 PM, joseph<[email protected]> wrote: >>> >>> bash-4.1# modprobe rtl8187 >>> FATAL: Module rtl8187 not found. >>> >>> bash-4.1# ifconfig -a >>> eth0 Link encap:Ethernet HWaddr 00:E0:4C:68:07:77 >>> inet addr:192.168.1.100 Bcast:255.255.255.255 >>> Mask:255.255.255.0 >>> UP BROADCAST RUNNING MULTICAST MTU:576 Metric:1 >>> RX packets:23281 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:15753 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:1000 >>> RX bytes:9782409 (9.3 Mb) TX bytes:2147564 (2.0 Mb) >>> Interrupt:41 Base address:0x8000 >>> >>> lo Link encap:Local Loopback >>> inet addr:127.0.0.1 Mask:255.0.0.0 >>> inet6 addr: ::1/128 Scope:Host >>> UP LOOPBACK RUNNING MTU:16436 Metric:1 >>> RX packets:37 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:37 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:0 >>> RX bytes:1931 (1.8 Kb) TX bytes:1931 (1.8 Kb) >>> >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# dmesg | tail >>> [ 30.652559] NET: Registered protocol family 10 >>> [ 30.652914] lo: Disabled Privacy Extensions >>> [ 41.737875] NET: Registered protocol family 5 >>> [ 916.490077] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM >>> is >>> zero. >>> [ 1689.232901] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM >>> is >>> zero. >>> [ 1689.232906] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM >>> is >>> zero. >>> [ 2008.814857] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM >>> is >>> zero. >>> [ 2008.837027] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM >>> is >>> zero. >>> [ 2279.237240] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM >>> is >>> zero. >>> [ 2279.237246] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM >>> is >>> zero. >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# tail /var/log/messages >>> Nov 23 21:19:16 Jose-notebook blueman-mechanism: loading Ppp >>> Nov 23 21:19:16 Jose-notebook blueman-mechanism: loading Network >>> Nov 23 21:19:16 Jose-notebook blueman-mechanism: loading Config >>> Nov 23 21:19:46 Jose-notebook blueman-mechanism: Exiting >>> Nov 23 21:30:58 Jose-notebook -- MARK -- >>> Nov 23 21:50:58 Jose-notebook -- MARK -- >>> Nov 23 21:51:05 Jose-notebook dhcpcd[1783]: eth0: renewing lease of >>> 192.168.1.100 >>> Nov 23 21:51:05 Jose-notebook dhcpcd[1783]: eth0: acknowledged >>> 192.168.1.100 >>> from 192.168.1.1 `�' >>> Nov 23 21:51:05 Jose-notebook dhcpcd[1783]: eth0: leased 192.168.1.100 >>> for >>> 7200 seconds >>> Nov 23 21:51:05 Jose-notebook dhcpcd[3325]: eth0: eth0: MTU set to 576 >>> bash-4.1# >>> >>> >>> >>> Em 23-11-2011 20:53, Ellington Santos escreveu: >>> >>> Então seu hardware é detectado, mas o módulo não subiu com sucesso. >>> >>> Tente um modprobe rtl8187 >>> Cole aqui a saida dos comandos abaixo logo após tentar carregar o módulo: >>> >>> ifconfig -a >>> dmesg | tail >>> tail /var/log/messages >>> >>> >>> >>> On Wed, Nov 23, 2011 at 9:47 PM, joseph<[email protected]> wrote: >>> >>> bash-4.1# ifconfig -a >>> eth0 Link encap:Ethernet HWaddr 00:E0:4C:68:07:77 >>> inet addr:192.168.1.100 Bcast:255.255.255.255 >>> Mask:255.255.255.0 >>> UP BROADCAST RUNNING MULTICAST MTU:576 Metric:1 >>> RX packets:20348 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:13474 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:1000 >>> RX bytes:8998639 (8.5 Mb) TX bytes:1745824 (1.6 Mb) >>> Interrupt:41 Base address:0x8000 >>> >>> lo Link encap:Local Loopback >>> inet addr:127.0.0.1 Mask:255.0.0.0 >>> inet6 addr: ::1/128 Scope:Host >>> UP LOOPBACK RUNNING MTU:16436 Metric:1 >>> RX packets:37 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:37 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:0 >>> RX bytes:1931 (1.8 Kb) TX bytes:1931 (1.8 Kb) >>> >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# lsmod >>> Module Size Used by >>> snd_seq_dummy 1119 0 >>> snd_seq_oss 25900 0 >>> snd_seq_midi_event 4696 1 snd_seq_oss >>> snd_seq 42680 5 >>> snd_seq_dummy,snd_seq_oss,snd_seq_midi_event >>> snd_seq_device 4505 3 snd_seq_dummy,snd_seq_oss,snd_seq >>> snd_pcm_oss 34554 0 >>> snd_mixer_oss 14726 2 snd_pcm_oss >>> appletalk 22978 20 >>> psnap 1545 1 appletalk >>> llc 2988 1 psnap >>> ipv6 236629 24 >>> pcmcia 32618 0 >>> pcmcia_core 10169 1 pcmcia >>> cpufreq_ondemand 7672 2 >>> speedstep_lib 2663 0 >>> acpi_cpufreq 5195 1 >>> freq_table 2039 2 cpufreq_ondemand,acpi_cpufreq >>> mperf 923 1 acpi_cpufreq >>> plip 11167 0 >>> lp 7105 0 >>> ppdev 4901 0 >>> parport_pc 18218 0 >>> parport 25627 4 plip,lp,ppdev,parport_pc >>> fuse 58136 1 >>> i915 360914 2 >>> uvcvideo 55980 0 >>> drm_kms_helper 23927 1 i915 >>> drm 143170 3 i915,drm_kms_helper >>> videodev 57461 1 uvcvideo >>> v4l1_compat 13666 2 uvcvideo,videodev >>> i2c_algo_bit 4287 1 i915 >>> joydev 7695 0 >>> r8169 32377 0 >>> intel_agp 9000 1 i915 >>> intel_gtt 11414 3 i915,intel_agp >>> i2c_i801 7018 0 >>> rtc_cmos 7970 0 >>> rtc_core 11871 1 rtc_cmos >>> video 10482 1 i915 >>> processor 23158 3 acpi_cpufreq >>> agpgart 23062 3 drm,intel_agp,intel_gtt >>> snd_hda_codec_hdmi 20152 1 >>> mii 3334 1 r8169 >>> thermal 6718 0 >>> thermal_sys 11426 3 video,processor,thermal >>> i2c_core 16421 6 >>> i915,drm_kms_helper,drm,videodev,i2c_algo_bit,i2c_i801 >>> output 1456 1 video >>> rtc_lib 1502 1 rtc_core >>> sparse_keymap 2436 0 >>> snd_hda_codec_realtek 222970 1 >>> shpchp 23205 0 >>> wmi 7129 0 >>> evdev 7303 17 >>> battery 8431 0 >>> sg 21511 0 >>> hwmon 1065 1 thermal_sys >>> snd_hda_intel 18443 2 >>> psmouse 40986 0 >>> serio_raw 3542 0 >>> snd_hda_codec 61720 3 >>> snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel >>> snd_hwdep 4772 1 snd_hda_codec >>> snd_pcm 59843 4 >>> snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec >>> snd_timer 15717 2 snd_seq,snd_pcm >>> snd 43891 14 >>> >>> snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer >>> soundcore 4641 2 snd >>> snd_page_alloc 5925 2 snd_hda_intel,snd_pcm >>> button 4005 1 i915 >>> ac 2465 0 >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# lspci >>> 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory >>> Controller Hub (rev 09) >>> 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series >>> Chipset >>> Integrated Graphics Controller (rev 09) >>> 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset >>> Integrated Graphics Controller (rev 09) >>> 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI >>> Controller #4 (rev 03) >>> 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI >>> Controller #5 (rev 03) >>> 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI >>> Controller #6 (rev 03) >>> 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI >>> Controller #2 (rev 03) >>> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio >>> Controller (rev 03) >>> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express >>> Port >>> 1 (rev 03) >>> 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express >>> Port >>> 2 (rev 03) >>> 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express >>> Port >>> 3 (rev 03) >>> 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express >>> Port >>> 6 (rev 03) >>> 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI >>> Controller #1 (rev 03) >>> 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI >>> Controller #2 (rev 03) >>> 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI >>> Controller #3 (rev 03) >>> 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI >>> Controller #1 (rev 03) >>> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) >>> 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev >>> 03) >>> 00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE >>> Controller (rev 03) >>> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller >>> (rev >>> 03) >>> 00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE >>> Controller (rev 03) >>> 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >>> RTL8111/8168B >>> PCI Express Gigabit Ethernet controller (rev 03) >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# lsusb >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 >>> multicard reader >>> Bus 002 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B >>> Wireless 802.11g 54Mbps Network Adapter >>> Bus 002 Device 003: ID 058f:3831 Alcor Micro Corp. >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> bash-4.1# >>> >>> >>> >>> >>> >>> >>> Em 22-11-2011 07:39, Ellington Santos escreveu: >>> >>> Joseph, >>> >>> Primeiramente você precisa saber se sua placa foi detectada. Vamos >>> verificar a pilha de detecção de forma reversa. Execute os comandos >>> abaixo como root. Caso algum deles seja bem sucedido, os demais não >>> precisam ser executados: >>> >>> >>> 1) Camada de userspace: >>> ifconfig -a >>> Verifique se o dispositivo wlan0 está na lista. >>> >>> 2) Camada de kernelspace: >>> lsmod >>> Verifique se o módulo rtl8187 está na lista. >>> >>> 3) Camada de hardware: >>> lspci ou lsusb (depende do seu dispositivo) >>> Verifique se o hardware aparece na lista. >>> >>> >>> Se o (1) já funcionar, quer dizer que seu dispositivo já está pronto >>> para o uso. Basta configurar manualmente a rede ou instalar o wicd da >>> pasta Extra do DVD de instalação do Slackware. Mais instruções no >>> arquivo README.SLACKWARE na mesma pasta do pacote. >>> >>> Se você chegar ao (2) ou (3), envie o arquivo /var/log/messages e a >>> saída do comando dmesg como anexo. >>> >>> Att, >>> >>> Ellington Santos (aka necropresto) >>> >>> >>> 2011/11/22 joseph<[email protected]>: >>> >>> Olá boa noite a todos, >>> então instalei o slackware 13.37 porem não consegui configurar minha >>> wireless. >>> eu estou com um notebook sti is 1412 e o modelo da placa é REDE WIRELESS >>> RTL8187B >>> >>> " >>> bash-4.1# lshw -class system >>> jose-notebook >>> description: Notebook >>> product: IS 1412 () >>> vendor: Semp Toshiba >>> version: 20ga& ICH9M Chipset >>> serial: 091025537 >>> width: 32 bits >>> capabilities: smbios-2.5 dmi-2.5 smp-1.4 smp >>> configuration: administrator_password=disabled boot=normal >>> chassis=notebook cpus=2 frontpanel_password=unknown >>> keyboard_password=unknown power-on_password=disabled >>> *-remoteaccess UNCLAIMED >>> vendor: Intel >>> physical id: 2 >>> capabilities: outbound >>> bash-4.1# >>> " >>> >>> -- >>> Atenciosamente, >>> >>> José Miranda >>> Assessor de TI >>> Semana da Engenharia 2012 >>> www.semanadaeng.com.br >>> skype: joseph.inf >>> telefone: (27) 9867-2303 >>> Engenharia da Computação - UFES >>> >>> - - >>> >>> Seja livre, use GNU/Linux! >>> Open Source - Milhares de mentes abertas não podem estar enganadas! >>> -- >>> >>> -- >>> GUS-BR - Grupo de Usuários de Slackware Brasil >>> http://www.slackwarebrasil.org/ >>> http://groups.google.com/group/slack-users-br >>> >>> Antes de perguntar: >>> http://www.istf.com.br/perguntas/ >>> >>> Para sair da lista envie um e-mail para: >>> [email protected] >>> >>> -- >>> Atenciosamente, >>> >>> José Miranda >>> Assessor de TI >>> Semana da Engenharia 2012 >>> www.semanadaeng.com.br >>> skype: joseph.inf >>> telefone: (27) 9867-2303 >>> Engenharia da Computação - UFES >>> >>> - - >>> >>> Seja livre, use GNU/Linux! >>> Open Source - Milhares de mentes abertas não podem estar enganadas! >>> -- >>> >>> -- >>> GUS-BR - Grupo de Usuários de Slackware Brasil >>> http://www.slackwarebrasil.org/ >>> http://groups.google.com/group/slack-users-br >>> >>> Antes de perguntar: >>> http://www.istf.com.br/perguntas/ >>> >>> Para sair da lista envie um e-mail para: >>> [email protected] >>> >>> >>> -- >>> Atenciosamente, >>> >>> José Miranda >>> Assessor de TI >>> Semana da Engenharia 2012 >>> www.semanadaeng.com.br >>> skype: joseph.inf >>> telefone: (27) 9867-2303 >>> Engenharia da Computação - UFES >>> >>> - - >>> >>> Seja livre, use GNU/Linux! >>> Open Source - Milhares de mentes abertas não podem estar enganadas! >>> -- >>> >>> -- >>> GUS-BR - Grupo de Usuários de Slackware Brasil >>> http://www.slackwarebrasil.org/ >>> http://groups.google.com/group/slack-users-br >>> >>> Antes de perguntar: >>> http://www.istf.com.br/perguntas/ >>> >>> Para sair da lista envie um e-mail para: >>> [email protected] >>> >>> >>> -- >>> Atenciosamente, >>> >>> José Miranda >>> Assessor de TI >>> Semana da Engenharia 2012 >>> www.semanadaeng.com.br >>> skype: joseph.inf >>> telefone: (27) 9867-2303 >>> Engenharia da Computação - UFES >>> >>> - - >>> >>> Seja livre, use GNU/Linux! >>> Open Source - Milhares de mentes abertas não podem estar enganadas! >>> -- >>> >>> -- >>> GUS-BR - Grupo de Usuários de Slackware Brasil >>> http://www.slackwarebrasil.org/ >>> http://groups.google.com/group/slack-users-br >>> >>> Antes de perguntar: >>> http://www.istf.com.br/perguntas/ >>> >>> Para sair da lista envie um e-mail para: >>> [email protected] >>> >>> >>> -- >>> Atenciosamente, >>> >>> José Miranda >>> Assessor de TI >>> Semana da Engenharia 2012 >>> www.semanadaeng.com.br >>> skype: joseph.inf >>> telefone: (27) 9867-2303 >>> Engenharia da Computação - UFES >>> >>> - - >>> >>> Seja livre, use GNU/Linux! >>> Open Source - Milhares de mentes abertas não podem estar enganadas! >>> -- >>> >>> -- >>> GUS-BR - Grupo de Usuários de Slackware Brasil >>> http://www.slackwarebrasil.org/ >>> http://groups.google.com/group/slack-users-br >>> >>> Antes de perguntar: >>> http://www.istf.com.br/perguntas/ >>> >>> Para sair da lista envie um e-mail para: >>> [email protected] > > > -- > Atenciosamente, > > José Miranda > Assessor de TI > Semana da Engenharia 2012 > www.semanadaeng.com.br > skype: joseph.inf > telefone: (27) 9867-2303 > Engenharia da Computação - UFES > > - - > > Seja livre, use GNU/Linux! > Open Source - Milhares de mentes abertas não podem estar enganadas! > -- > > -- > GUS-BR - Grupo de Usuários de Slackware Brasil > http://www.slackwarebrasil.org/ > http://groups.google.com/group/slack-users-br > > Antes de perguntar: > http://www.istf.com.br/perguntas/ > > Para sair da lista envie um e-mail para: > [email protected] -- GUS-BR - Grupo de Usuários de Slackware Brasil http://www.slackwarebrasil.org/ http://groups.google.com/group/slack-users-br Antes de perguntar: http://www.istf.com.br/perguntas/ Para sair da lista envie um e-mail para: [email protected]
