Better call Adaptec and give them your TSID number for support. They can
help you then.
Swapping the 2 drives around, does it give the same drive error or it's
always drive 1?
Can you test this card and drives in another PC.. mainly different
Motherboard..?
thanks,
George Vieira
Network Administrator
http://www.citadelcomputer.com.au
PGP Fingerprint : 43DC 92AC 1A82 27B2 E97B 52F1 B60F 301A 38A9 A10C
PGP KeyID: 0x38A9A10C
-----Original Message-----
From: Alan Lee [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 25, 2000 3:07 PM
To: SLUG
Subject: Re: [SLUG] Adaptec 2100S
It is failing before the OS. Here is an example.
Setup the RAID array
Boot to a M$ FDD
Setup FDISK
Reboot
Boot to a M$ FDD
Format C:
Copy a few files to C:
BEEEEEEEEEEEEEEEEEEEEEEEEEEP!
Reboot, Enter the RAID BIOS.
"Drive ID1 FAILED!"
Regards, Alan Lee
Ecom Computers Australia
----- Original Message -----
From: "George Vieira" <[EMAIL PROTECTED]>
To: "'Alan Lee'" <[EMAIL PROTECTED]>; "SLUG" <[EMAIL PROTECTED]>
Sent: Wednesday, October 25, 2000 3:01 PM
Subject: RE: [SLUG] Adaptec 2100S
> I guess that your running *nix? WHat OS and version are you running?
>
> I have seen problems with RH6.2 until you use the latest version ( i used
> bleeding edge )
>
> thanks,
> George Vieira
> Network Administrator
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
--
SLUG - Sydney Linux User Group Mailing List - http://slug.org.au/
More Info: http://slug.org.au/lists/listinfo/slug
