[SLUG] delaying eth0 initialization

[kiran babu]

Hi everybody,   This is the problem Iam facing :   At boot time the following message is displayed :   Bringing up eth0 : insmod failed : Hint :insmod errors could be caused by incorrect module parameters ,including IRQ and I/O . Delaying eth0 initialization.   A few details :   The NIC is from D-link with rtl8139 driver. /proc/pci shows ethernet with IRQ 9 and I/O address 0xd800 It also shows Unknown vendor  Unknown device(rev 16) Vendor Id 1186  Device Id 1300   ifconfig does not show eth0. The module is available as a loadable kernel module,however,lsmod does not show the associated module i.e rtl8139.   Please help me.   With Regards, Sudhish