Do you have RJ45 crimpers? Try recrimping the original connector. If that fails, cut off old connector (saev for reference) and crimp on a new connector.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, May 27, 2003 10:17 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] recovering airBridges > Hi Tim, > > Does the data traffic still passing thru the device Ethernet port, ie. > PC attached behind an airBridge can ping across to the AP. This is > important info to ascertain whether the ethernet port is still alive or > not. Yes, when I mean recoverable by software, I mean re-update the > firmware, restore factory default, recovery program for airBridge > indoor. > > Alex > sB Tech Support No, it doesn't pass traffic to the client PC/router. The only communicating that it does is from the radio to the ap. In other words, I can see it, ping it and upgrade it from the wireless side. From the Ethernet side, I can't see it, can't ping it and can't upgrade it. Can't talk through it to the wireless side nor vice versa (can't send traffic to the client PC). Tim Foster www.AledoBroadBand.com Aledo's only high-speed ISP The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
