> Pls change the Ethernet cable & AC adaptor and connect to PC direct. > Does this works? If the problem still persists, then this unit has to > RMA.
I've changed PCMICA cards and cables. I don't *think* I've tried a different power supply, but I'll do that too. Just to recap.. If I use the following setup: server -> airPoint -> airBridge -> (ethernet) -> laptop 192.168.1.1 .1.2 .1.3 .1.4 I get these results: -airBridge Eth light is on -airBridge WIFI light (blue) is solid -Laptop PCMCIA NIC ETH light is off -Laptop cannot see (ping or simpleMonitor) airBridge through the Ethernet port -Laptop cannot see (ping, ftp, etc) airPoint -Laptop cannot see (ping, ftp, etc) server -Server can see airPoint (ping and simpleMonitor) -Server can see airBridge (ping and simpleMonitor) through the wireless port -Server can re-apply airBridge firmware via wireless port -Server cannot ping laptop through wireless port -Multiple Resets of airBridge have no effect -Multiple re-application of firmware has no effect -Changing cables has no effect -Changing airPoint with Orinoco ap500 has no effect -Using a different airBridge in the same configuration works! I'm inclined to think the ethernet port of the airBridge is shot. I'll try a different power supply (an 18v too!) and try simpleDeploy to see what happens. Tim Foster www.AledoBroadBand.com Aledo's only high-speed ISP The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
