I think the actual powerShot was good up to 50v, not the ap's (since technically you could use the powerShot with other equipment). They probably recently changed it so as not to confuse anyone.
I've been using a similar model from mouser (418-TR2518-12). Same spec (well 1.4a 18Vdc). A little cheaper ($14.99). Still have to cut and reverse the pair, though. Dino ----- Original Message ----- From: "TopsailNet" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, May 28, 2003 8:48 PM Subject: RE: [smartBridges] 18V DC Power Supply > Just opened my first new APPO - the power shot on this one says "18v Max" - > I think I need some guidance on this... Is there a difference between the > old ones that say "upto 50v" and the new one? > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of TopsailNet > Sent: Wednesday, May 28, 2003 7:09 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] 18V DC Power Supply > > > Please post SB response to warranty issue. I'm pretty sure a lot of us would > like to know. > > Harvey > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > Support(at)inet2000.com > Sent: Wednesday, May 28, 2003 5:35 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] 18V DC Power Supply > > > Thanx! I'll ask SB if this is OK or if will void the warranty > and risk letting out the Magic Blue Smoke. - Todd > > From: "TopsailNet" <[EMAIL PROTECTED]> > > I've got two APPO's running on a 30 volt 1 amp Radio Shack part number > > 273-1668. It comes with a variety of adapters - I use type "N" and put the > > negative to the center pin. Sticker price $21.95 > > > > Seems to work OK - the Power Shot says "upto 50V" so I guess it's only > > drawing the current it needs. > > > > I replaced one to see if it would fix my dead ethernet / dead RF problem, > it > > didn't!! But I left it there anyway. The other is on a long cat5 run up a > > tower. > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Tim Kerns > > Sent: Wednesday, May 28, 2003 5:16 PM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] 18V DC Power Supply > > > > > > Have you tried Radio Shack... They have an 18vdc 1 amp. I think the > > barrel is a type "O" to fit the SB injector. > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > Support(at)inet2000.com > > Sent: Wednesday, May 28, 2003 1:49 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] 18V DC Power Supply > > > > > > These are like $27.50 each? > > > > Well, SmartBridges sent me this link. It's only 1 amp, > > but it is VERY affordable. SB referred to it as 1.6A, > > but the item in the link looks to be only 1A. > > > > http://www.partsexpress.com/pe/showdetl.cfm?st=0&st2=0&st3=0&DID=7&Produ > > ct_ID=118071&DS_ID=3 > > > > As well, I am in Canada, so I always risk some goofball charging $50 to > > fill out some customs / duty form. It's not uncommon to order a $5 item > > and pay $75 for it, if it get's shipped the wrong way and goes through > > the wrong hands. I was hoping to find a Canadian company that sold them > > & avoid that. Binary Solutions (the new SB distributor here) hasn't > > been a lot of help in locating a larger adapter. I would have thought > > they'd have one available - even if they simply bought them from some > > OEM. I'll keep looking for a CDN source - any help would be appreciated > > anyone. :-) > > - Todd > > > > From: "Robin McCaig" <[EMAIL PROTECTED]> http://www.mouser.com > > > > They got 13 in stock, make that 11, I just ordered 2 myself =d. > > > > Robin > > > > -----Original Message----- > > From: Support(at)inet2000.com [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, May 28, 2003 3:04 PM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] 18V DC Power Supply > > > > SmartBridges is suggesting I try an 18v powersupply. > > They suggest Mouser 552-PSA-31U-180 18V @1.6A > > Does anyone have a good source for something in this > > range, preferably something in Canada so it'll be quick > > and won't kill me on shipping / duty. > > > > Any suggested sources (or off list contacts) would be appreciated. > > > > Todd > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203. > > > > > //Virus Scanned by: AF-Services Networks. //Updated Daily! / The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
