We are qualifying one unit right now so hopefully we will be able to ship it in next few weeks.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Email Sent: Friday, May 30, 2003 2:35 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] 18V DC Power Supply This smartBridge power supply situation is getting to be the most stupid situation I have ever been in since I have been in business for 20 years Day before yesterday sB said companies were using the Mouser 552-PSA-31U-180 I order 5 of these, get them in today and I have to cut the ends off my 12v transformer that came with the sB to make them work or send them back. I could understand reversing the polarity but, the plug doesn't even match the sBridges plug. I should not even have to do this. Ridiculous is not even the word for this!!!!!!!!!! joe kelley east texas dsl -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Support(at)inet2000.com Sent: Thursday, May 29, 2003 11:06 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] 18V DC Power Supply Sure Harvey. SmartBridges said no... From: Seeni (SmartBridges) >Sent: Wednesday, May 28, 2003 8:24 PM >Subject: RE: Poor Rate >Please do not try with 30V adapter and our SB devices will >accept maximum 18V only. The 18V power supply only >required if the Ethernet cable length exceeds more than 50 meters. From: "TopsailNet" <[EMAIL PROTECTED]> > Please post SB response to warranty issue. I'm pretty sure a lot of us would > like to know. > > Harvey > > From: Support(at)inet2000.com > Thanx! I'll ask SB if this is OK or if will void the warranty > and risk letting out the Magic Blue Smoke. - Todd > > From: "TopsailNet" <[EMAIL PROTECTED]> > > I've got two APPO's running on a 30 volt 1 amp Radio Shack part number > > 273-1668. It comes with a variety of adapters - I use type "N" and put the > > negative to the center pin. Sticker price $21.95 > > > > Seems to work OK - the Power Shot says "upto 50V" so I guess it's only > > drawing the current it needs. > > > > I replaced one to see if it would fix my dead ethernet / dead RF problem, > it > > didn't!! But I left it there anyway. The other is on a long cat5 run up a > > tower. > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Tim Kerns > > Sent: Wednesday, May 28, 2003 5:16 PM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] 18V DC Power Supply > > > > > > Have you tried Radio Shack... They have an 18vdc 1 amp. I think the > > barrel is a type "O" to fit the SB injector. > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > Support(at)inet2000.com > > Sent: Wednesday, May 28, 2003 1:49 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] 18V DC Power Supply > > > > > > These are like $27.50 each? > > > > Well, SmartBridges sent me this link. It's only 1 amp, > > but it is VERY affordable. SB referred to it as 1.6A, > > but the item in the link looks to be only 1A. > > > > http://www.partsexpress.com/pe/showdetl.cfm?st=0&st2=0&st3=0&DID=7&Produ > > ct_ID=118071&DS_ID=3 > > > > As well, I am in Canada, so I always risk some goofball charging $50 to > > fill out some customs / duty form. It's not uncommon to order a $5 item > > and pay $75 for it, if it get's shipped the wrong way and goes through > > the wrong hands. I was hoping to find a Canadian company that sold them > > & avoid that. Binary Solutions (the new SB distributor here) hasn't > > been a lot of help in locating a larger adapter. I would have thought > > they'd have one available - even if they simply bought them from some > > OEM. I'll keep looking for a CDN source - any help would be appreciated > > anyone. :-) > > - Todd > > > > From: "Robin McCaig" <[EMAIL PROTECTED]> http://www.mouser.com > > > > They got 13 in stock, make that 11, I just ordered 2 myself =d. > > > > Robin > > > > -----Original Message----- > > From: Support(at)inet2000.com [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, May 28, 2003 3:04 PM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] 18V DC Power Supply > > > > SmartBridges is suggesting I try an 18v powersupply. > > They suggest Mouser 552-PSA-31U-180 18V @1.6A > > Does anyone have a good source for something in this > > range, preferably something in Canada so it'll be quick > > and won't kill me on shipping / duty. > > > > Any suggested sources (or off list contacts) would be appreciated. > > > > Todd > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
