But if there is no signal, the unit keep rebooting??? So it is not that simple as what we want it to be. We have to find the roof cause of the problem and tackle it. It is only a small percent having such issue and the possibility is either bad power supply or flash corruption.
Another area is to look at environment and the installation proper especially for outdoor units. Pls see our Ideal Installation Guide. http://www.smartbridges.com/new/support/ideal_install.php Alex sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Carter Sent: Wednesday, June 11, 2003 4:42 AM To: '[EMAIL PROTECTED]' Subject: Re: [smartBridges] trouble with units. I see the same problems. Thats why I suggested they add in the firmware that the radio reboot itself after it locks or looses signal over 5 min. I know it would help in my situation. Usually a simple reboot fixes everything. Jerry ----- Original Message ----- From: "George M. Walden" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 10, 2003 3:14 PM Subject: Re: [smartBridges] trouble with units. > > Ditto, on the Ethernet issue w/ sB2100. We have had 3 customers that needed > replaced (as of now) 3 times each (total of 9 units).....all flaky > units were from the last shipment. Or, should I say, from the first > batch of units that made it to the USA from sB's new contract OEM. > > -George M. Walden > > > on 6/10/03 1:19 PM, Scott Damron at [EMAIL PROTECTED] wrote: > > > Yes, > > My last one would not see the AP and the ethernet and wireless > > lights would go out when you did a search for wireless networks. It > > would see the network when you rebooted, but when you tried to > > assoc. it, it would again loose both lights and freeze. Luckily, we > > purchased them from electro comm and they RMA'd them without > > trouble. > > > > Scott > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of David Blood > > Sent: Tuesday, June 10, 2003 10:52 AM > > To: [EMAIL PROTECTED] org > > Subject: RE: [smartBridges] trouble with units. > > > > > > With my last shipment of sb2100 I am having terrible issues. I don't > > believe that it is the configuration as I have set up many of these > > and have not had these problems in the past. > > > > Issues. > > > > Ethernet port is flaky. Sometimes it works and sometime it doesn't. > > No distance is not an issue on the ethernet cable. All case less > > than 50 ft and in one case less than 5 ft. It seems to happen when I > > make any configuration change. I can power cycle the unit to get it > > to come back. > > > > When I try to use site survey to list availabe APs I get nothing. > > When it does work then several aps show up. > > > > The air bridges lose associations and then wil not reassociate with > > out a reboot. > > > > > > Anyone else having these issues with the latest shipments? > > > > Kind Regards, > > > > David > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > > (in the body type unsubscribe smartBridges) > > Archives: http://198.63.203.6 > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > > <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://198.63.203.6 > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
