That's EXACTLY what's happening with the last Outdoor I installed.  I
think they, SB, asked me to get them the Ethernet injector.

-- 
Jeremy

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of George M. Walden
Sent: Tuesday, June 10, 2003 4:15 PM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] trouble with units.


Ditto, on the Ethernet issue w/ sB2100.  We have had 3 customers that
needed
replaced (as of now) 3 times each (total of 9 units).....all flaky units
were from the last shipment.  Or, should I say, from the first batch of
units that made it to the USA from sB's new contract OEM.

-George M. Walden


on 6/10/03 1:19 PM, Scott Damron at [EMAIL PROTECTED] wrote:

> Yes,
> My last one would not see the AP and the ethernet and wireless lights
> would go out when you did a search for wireless networks.  It would
see
> the network when you rebooted, but when you tried to assoc. it, it
would
> again loose both lights and freeze.  Luckily, we purchased them from
> electro comm and they RMA'd them without trouble.
> 
> Scott
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of David Blood
> Sent: Tuesday, June 10, 2003 10:52 AM
> To: [EMAIL PROTECTED] org
> Subject: RE: [smartBridges] trouble with units.
> 
> 
> With my last shipment of sb2100 I am having terrible issues. I don't
> believe that it is the configuration as I have set up many of these
and
> have not had these problems in the past.
> 
> Issues.
> 
> Ethernet port is flaky.  Sometimes it works and sometime it doesn't.
No
> distance is not an issue on the ethernet cable.  All case less than 50
> ft and in one case less than 5 ft. It seems to happen when I make any
> configuration change.  I can power cycle the unit to get it to come
> back.
> 
> When I try to  use site survey to list availabe APs I get nothing.
When
> it does work then several aps show up.
> 
> The air bridges lose associations and then wil not reassociate with
out
> a reboot.
> 
> 
> Anyone else having these issues with the latest shipments?
> 
> Kind Regards,
> 
> David
> 
> 
> 
> 
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
> the body type unsubscribe smartBridges)
> Archives: http://198.63.203.6
> 
> 
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
> 

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6  


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6  

Reply via email to