Dear god this is a good idea how about if it doesn't get associated reboot every minute or just keep retrying to associate, if no data or if you guys cant figure out why the things are freezing which I have this problem now. And the problem with if a remote essid change takes place and it fails to reassociate to that ap fail back to the old ap THIS IS A MUST I HAVE SPENT WAY TO MUCH MONEY on truck rolls because im trying to spread ut my clients and the smart didn't get associated back properly and then I have to have the client down till I can get a truck there and then I got to pay the truck itself so it's a costly lil thing guys please add this. As a note I understand its difficult over at smartbridges but whats the sched on the next firmware release now that the new software is out.
Chris
-----Original Message-----
From: Jeremy Oswalt [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 10, 2003 9:46 PM
To: [EMAIL PROTECTED]
That's EXACTLY what's happening with the last Outdoor I installed. I
think they, SB, asked me to get them the Ethernet injector.
--
Jeremy
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of George M. Walden
Sent: Tuesday, June 10, 2003 4:15 PM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] trouble with units.
Ditto, on the Ethernet issue w/ sB2100. We have had 3 customers that
needed
replaced (as of now) 3 times each (total of 9 units).....all flaky units
were from the last shipment. Or, should I say, from the first batch of
units that made it to the USA from sB's new contract OEM.
-George M. Walden
on 6/10/03 1:19 PM, Scott Damron at [EMAIL PROTECTED] wrote:
> Yes,
> My last one would not see the AP and the ethernet and wireless lights
> would go out when you did a search for wireless networks. It would
see
> the network when you rebooted, but when you tried to assoc. it, it
would
> again loose both lights and freeze. Luckily, we purchased them from
> electro comm and they RMA'd them without trouble.
>
> Scott
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of David Blood
> Sent: Tuesday, June 10, 2003 10:52 AM
> To: [EMAIL PROTECTED] org
> Subject: RE: [smartBridges] trouble with units.
>
>
> With my last shipment of sb2100 I am having terrible issues. I don't
> believe that it is the configuration as I have set up many of these
and
> have not had these problems in the past.
>
> Issues.
>
> Ethernet port is flaky. Sometimes it works and sometime it doesn't.
No
> distance is not an issue on the ethernet cable. All case less than 50
> ft and in one case less than 5 ft. It seems to happen when I make any
> configuration change. I can power cycle the unit to get it to come
> back.
>
> When I try to use site survey to list availabe APs I get nothing.
When
> it does work then several aps show up.
>
> The air bridges lose associations and then wil not reassociate with
out
> a reboot.
>
>
> Anyone else having these issues with the latest shipments?
>
> Kind Regards,
>
> David
>
>
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
> the body type unsubscribe smartBridges)
> Archives: http://198.63.203.6
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
