RE: [smartBridges] Urgent DHCP Problem (through APPOs)

[Jason]

Title: Message

No. The router also has auto sensing, so this shouldn’t be an issue.   Jason   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Tom Haynes Sent: Saturday, June 21, 2003 2:45 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Urgent DHCP Problem (through APPOs)   This may be a dumb question ... BUT... are you using a crossover adapter to plug the APPo in to the WAN port of the router? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Sent: Saturday, June 21, 2003 11:55 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Urgent DHCP Problem (through APPOs) Importance: High I am having a problem passing DHCP over a PtP link of APPOs. Here is what I have:   DSL Modem – APPO Wireless Bridge – APPO Wireless Bridge – DSL Router (Cheapo D-Link 714P) – Devices   The DSL router is not getting its WAN info from the DSL modem.   However… If I do:   DSL Modem – APPO Wireless Bridge – APPO Wireless Bridge – Vonage ATA or DSL Modem – APPO Wireless Bridge – APPO Wireless Bridge – Computer w/ Wireless ethernet adapter (on another channel from the APPO wireless bridge, of course)   … the ATA or computer is able to get a WAN address. The Vonage phone works or the computer can browse the Internet.   Furthermore, if I plug the remote APPO into a LAN port of the router, and the ATA into another LAN port, the ATA can get a WAN address and work fine.   I could plug the router directly into the DSL modem and see if it works, but that is not practical at this very second. Any ideas?   Jason Szumlanski