Re: [smartBridges] Questions on SmartBridge Products

[Dennis Burgess]

Title: Message

Jason,   Thanks for the help.  You have answered alot of questions for me.  As far as the Bandwidth per user, does anyone have any suggestions on how to limit this.  I'm sure that most people are setting up T1s and letting 30-50 users run off of that T1.  What about if you are running a T3 and bouncing the signal across three towers? Are there no bandwidth constraints that users have?    I understand how not to deal with customers that can't pay for the equipment.  That does make sences to me.    I know everyone tells me to get to there website, but unfortunlly it does not tell you a great deal on the technology itself and capabilities of the system.  Maybe this is cause of there new enhanced website.   Nor does it tell how these units to be setup.   I have a tower up, with one access point.  This point is also running bridge to recive signal from my main network and recive whatever bandwidth that I need.  I want to cover a full 360 from this tower, from the specs I see its only 28 degress.  Does this mean to cover 360 I need 12 units to cover a full 360 radius?  Also, how are you connecting APs.  I have found some people are using a POE Switch/Hub?  What about weather, I assuming that everyone is putting a weatherproof encloser on the tower somewhere with the switch?    Just a FYI, I was planning on feeding several more towers wwith AP to AP functionality.  This is possable correct?   Dennis       ----- Original Message ----- From: Jason To: [EMAIL PROTECTED] Sent: Wednesday, June 25, 2003 2:27 PM Subject: RE: [smartBridges] Questions on SmartBridge Products   Do the AirPoints have a bandwidth limitation setting per user.. I.E. I want each user to have 256 or 512k bandwidth only.   No.   Radius authencation, is there one built in, i.e. do I have to use my own radius server?   Yes, your own.   What kind of range can I get out of a AirPoint Total?  The prices I am getting is around $380 per unit, is this correct?   20 miles + (did you read the specs and sB website?). Where are you getting them for $380, and what qty?   What about installations on customer homes?  I can find the AirBridge Totals for a little under $300. What else is everyone using to install these?    I generally use a crescent wrench, drill, and some other tools depending on the install. Electrical tape, suntan lotion, and Gatorade also come in handy.   What kind of warrenties are with these products?   Check www.smartbridges.com   If I wanted to get a 360 radius from my tower of 150 foot, how many access points would I need?   Need: 1, Want: ?, need more info   What kind of site survey equipment is best and simplest to use?   Depends on personal preference. I like to bring along my portable custom built rig.   Anyone want to share what they are doing to help offset customer costs of equipment?   Nothing. I don't deal with people who can't pay for the install and equip costs - these are the same folks who want 1.5Mbps for $20/month. Although, I do eat the cost of electrical tape, suntan lotion, and other supplies.   Thanx in advance,   Your welcome.