Yea I was talking about the clients power. I think there have been some posts about wep hindering throughput though.
---------- Original Message ---------------------------------- From: "Ray" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Wed, 2 Jul 2003 07:16:54 -0700 >I have turned the power down to the point of dropping my clients that are >further out. A radio swap is not a minor undertaking when we consider our >climbing costs... > >I increased the power on the ABO that had slow (300k) upload and that >brought it up to about 1 meg. > >We do have 128 WEP enabled, will this have this much impact on speed? > > >----- Original Message ----- >From: "Stuart Pierce" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Wednesday, July 02, 2003 7:00 AM >Subject: Re: [smartBridges] Having throughput issues with APPO > > >> Swap out radios yet, turn down power yet ? >> >> ---------- Original Message ---------------------------------- >> From: "Ray" <[EMAIL PROTECTED]> >> Reply-To: [EMAIL PROTECTED] >> Date: Wed, 2 Jul 2003 06:47:23 -0700 >> >> >MessageI have tried locking everything to 11 with the same results. >> > >> > >> > ----- Original Message ----- >> > From: Jeremy Oswalt >> > To: [EMAIL PROTECTED] >> > Sent: Wednesday, July 02, 2003 6:24 AM >> > Subject: RE: [smartBridges] Having throughput issues with APPO >> > >> > >> > Also, be sure to set the rate to 11 Mbs with auto fallback on. I know >I get 300K when I set the radios to 1 or 2 Mbs. >> > >> > >> > >> > >> >>--------------------------------------------------------------------------- >--- >> > >> > Jeremy >> > >> > >> >>--------------------------------------------------------------------------- >--- >> > >> > -----Original Message----- >> > From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Ray >> > Sent: Wednesday, July 02, 2003 8:55 AM >> > To: [EMAIL PROTECTED] >> > Subject: Re: [smartBridges] Having throughput issues with APPO >> > >> > >> > >> > I have swapped the switch out for an old hub (10M only) and used a >cross over cable but still have the same problem. There are no LOS issues. >> > >> > >> > >> > >> > >> > ----- Original Message ----- >> > >> > From: Tom Haynes >> > >> > To: [EMAIL PROTECTED] >> > >> > Sent: Tuesday, July 01, 2003 11:06 PM >> > >> > Subject: RE: [smartBridges] Having throughput issues with APPO >> > >> > >> > >> > Are you relying on the switches auto-crossover function (if it has >it). Make sure that all radios have Basic Rates set to All or 11Mb with Auto >Fall Back enabled. If you are too close to the make sure the link can >support 11Mb. If you are too close or too far or poor LOS you will only get >lower speeds. >> > >> > -----Original Message----- >> > From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Ray >> > Sent: Tuesday, July 01, 2003 2:35 PM >> > To: [EMAIL PROTECTED] >> > Subject: [smartBridges] Having throughput issues with APPO >> > >> > Our wiPoP is having throughput issues. We have it plugged into a >switch that has our backhaul APPO plugged in. We can plug a laptop into the >switch and pull 4 megs all day. But when we associate with the wiPoP we can >only get 1 meg (total). >> > >> > >> > >> > We have 150 feet of cat 5 and we're using an 18v power supply. RSSI >and LQ is 100%. I can start a download (internal) and get 1-meg and on a >second client (different ABO) start a download and both drop to 500k. >> > >> > >> > >> > Does anyone have any ideas regarding this? >> > >> > >> > >> > >> > >> > >> --- >> [This E-mail scanned for viruses by Declude Virus By Avolve.net] >> >> The PART-15.ORG smartBridges Discussion List >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) >> Archives: http://archives.part-15.org >> > >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges ><yournickname> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) >Archives: http://archives.part-15.org >--- >[This E-mail scanned for viruses by Declude Virus By Avolve.net] > > --- [This E-mail scanned for viruses by Declude Virus By Avolve.net] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
