Swap out radios yet, turn down power yet ? ---------- Original Message ---------------------------------- From: "Ray" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Wed, 2 Jul 2003 06:47:23 -0700
>MessageI have tried locking everything to 11 with the same results. > > > ----- Original Message ----- > From: Jeremy Oswalt > To: [EMAIL PROTECTED] > Sent: Wednesday, July 02, 2003 6:24 AM > Subject: RE: [smartBridges] Having throughput issues with APPO > > > Also, be sure to set the rate to 11 Mbs with auto fallback on. I know I get 300K > when I set the radios to 1 or 2 Mbs. > > > > >------------------------------------------------------------------------------ > > Jeremy > > >------------------------------------------------------------------------------ > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ray > Sent: Wednesday, July 02, 2003 8:55 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Having throughput issues with APPO > > > > I have swapped the switch out for an old hub (10M only) and used a cross over cable > but still have the same problem. There are no LOS issues. > > > > > > ----- Original Message ----- > > From: Tom Haynes > > To: [EMAIL PROTECTED] > > Sent: Tuesday, July 01, 2003 11:06 PM > > Subject: RE: [smartBridges] Having throughput issues with APPO > > > > Are you relying on the switches auto-crossover function (if it has it). Make sure > that all radios have Basic Rates set to All or 11Mb with Auto Fall Back enabled. If > you are too close to the make sure the link can support 11Mb. If you are too close > or too far or poor LOS you will only get lower speeds. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ray > Sent: Tuesday, July 01, 2003 2:35 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Having throughput issues with APPO > > Our wiPoP is having throughput issues. We have it plugged into a switch that has > our backhaul APPO plugged in. We can plug a laptop into the switch and pull 4 megs > all day. But when we associate with the wiPoP we can only get 1 meg (total). > > > > We have 150 feet of cat 5 and we're using an 18v power supply. RSSI and LQ is > 100%. I can start a download (internal) and get 1-meg and on a second client > (different ABO) start a download and both drop to 500k. > > > > Does anyone have any ideas regarding this? > > > > > > --- [This E-mail scanned for viruses by Declude Virus By Avolve.net] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
