sB Tech Support wrote:
Does this happen on all units or only this particular one. Sometimes the old list is not clear and will show double. If you logoff and login again or even power reset, and goto site survey , does this happen again?
Alex
sB Tech Support
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Haynes Sent: Thursday, July 03, 2003 3:11 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] Site Survey question
It sounds like a major reflection. The second signal is received substantialy later and is viewed as a second signal.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Grommes (SpinnNet System Admin) Sent: Wednesday, July 02, 2003 1:43 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Site Survey question
It's not an issue, it's a question. Why does this happen? Why are the values different for the same radio?
sB Tech Support wrote:
We don't see this is an issue, since the Mac is the same, you can
double click to associate. To see the accurate RSSI & LQ, check the Link Status Tab after association.
Alex sB Tech Support
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt Grommes (SpinnNet System Admin)
Sent: Wednesday, July 02, 2003 11:41 PM
To: '[EMAIL PROTECTED]'
Subject: Re: [smartBridges] Site Survey question
I know they're not real time, that's not the issue. I've attached a screenshot to show you what I'm seeing. The RSSI percentages in this shot happen to be the same for the two entries with the same MAC but the
LQ values are different. The RSSIs are usually different as well.
sB Tech Support wrote:
Please click refresh the list. The RSSI & LQ you shown is not real time, so at different time will show different value.
Alex sB Tech Support
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Grommes (SpinnNet System Admin)
Sent: Wednesday, July 02, 2003 6:24 AM
To: '[EMAIL PROTECTED]'
Subject: [smartBridges] Site Survey question
If I manually enter in the SSID and channel of my radio into a
customer's Site Survey screen and then check the box to search for available networks, why do I see my radio listed twice? One listing
has
the SSID I entered and the other doesn't but most of the time the RSSI
and LQ values are different for the two entries even though it's the same radio (I know this because the MAC is the same).
-- -- Matt Grommes -- -- System Admin -- -- SpinnNet -- -- 505.938.7746 --
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
