Personally I had to cut out my AP2000's primarily cause they weren't putting out and performing as well as the APPO's were clients had problems sending mail (low transmit performance) for some reason maybe it was just my units :(
Chris
-----Original Message-----
From: Matt Grommes (SpinnNet System Admin) [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 03, 2003 11:16 AM
To: [EMAIL PROTECTED]
The radio is an Orinoco AP2000 with an Orinoco card in it.
It's up on a 65 foot tower with nothing to cause reflections around it.
It did the same thing when the tower used to be just a 30 foot pole. Now
it's a real tri-leg tower.
It's not really a huge problem or anything, I was more just curious. I
always specify my SSIDs anyway. I'll just chalk it up to something strange.
Thanks.
Tom Haynes wrote:
> that is not a smartBridge MAC... what kind of radio is it?
> -----Original Message-----
> *From:* [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] *On Behalf Of *sB Tech Support
> *Sent:* Wednesday, July 02, 2003 4:46 PM
> *To:* [EMAIL PROTECTED]
> *Subject:* RE: [smartBridges] Site Survey question
>
> We do not experience this most of the time. What AP you are using, the
> one with Mac 00-02-2D-8E-C3-C5? Does this behaviour one one particular
> AP, on different PC? It is strange the other APs only appear once.
>
>
>
> Alex
> sB Tech Support
>
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of Matt Grommes
> (SpinnNet System Admin)
> Sent: Thursday, July 03, 2003 4:13 AM
> To: '[EMAIL PROTECTED]'
> Subject: Re: [smartBridges] Site Survey question
>
>
> Yes, it happens on every AirBridge Outdoor that I've installed and it
> happens all the time, after I logoff, after reboot, etc.
>
>
> sB Tech Support wrote:
>
> > Does this happen on all units or only this particular one. Sometimes
> > the old list is not clear and will show double. If you logoff and
> > login again or even power reset, and goto site survey , does this
> > happen again?
> >
> > Alex
> > sB Tech Support
> >
> >
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]] On Behalf Of Tom Haynes
> > Sent: Thursday, July 03, 2003 3:11 AM
> > To: '[EMAIL PROTECTED]'
> > Subject: RE: [smartBridges] Site Survey question
> >
> >
> > It sounds like a major reflection. The second signal is received
> > substantialy later and is viewed as a second signal.
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]
> > On Behalf Of Matt Grommes (SpinnNet System Admin)
> > Sent: Wednesday, July 02, 2003 1:43 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [smartBridges] Site Survey question
> >
> >
> > It's not an issue, it's a question. Why does this happen? Why are the
> > values different for the same radio?
> >
> >
> > sB Tech Support wrote:
> >
> >
> >>We don't see this is an issue, since the Mac is the same, you can
> >>double click to associate. To see the accurate RSSI & LQ, check the
> >>Link Status Tab after association.
> >>
> >>Alex
> >>sB Tech Support
> >>
> >>
> >>
> >>
> >>-----Original Message-----
> >>From: [EMAIL PROTECTED]
> >>[mailto:[EMAIL PROTECTED]] On Behalf Of Matt Grommes
> >>(SpinnNet System Admin)
> >>Sent: Wednesday, July 02, 2003 11:41 PM
> >>To: '[EMAIL PROTECTED]'
> >>Subject: Re: [smartBridges] Site Survey question
> >>
> >>
> >>I know they're not real time, that's not the issue. I've attached a
> >>screenshot to show you what I'm seeing. The RSSI percentages in this
> >>shot happen to be the same for the two entries with the same MAC but
> >>the
> >>
> >>LQ values are different. The RSSIs are usually different as well.
> >>
> >>
> >>
> >>sB Tech Support wrote:
> >>
> >>
> >>
> >>>Please click refresh the list. The RSSI & LQ you shown is not real
> >>>time, so at different time will show different value.
> >>>
> >>>Alex
> >>>sB Tech Support
> >>>
> >>>
> >>>
> >>>
> >>>-----Original Message-----
> >>>From: [EMAIL PROTECTED]
> >>>[mailto:[EMAIL PROTECTED]] On Behalf Of Matt Grommes
> >>>(SpinnNet System Admin)
> >>>Sent: Wednesday, July 02, 2003 6:24 AM
> >>>To: '[EMAIL PROTECTED]'
> >>>Subject: [smartBridges] Site Survey question
> >>>
> >>>
> >>>If I manually enter in the SSID and channel of my radio into a
> >>>customer's Site Survey screen and then check the box to search for
> >>>available networks, why do I see my radio listed twice? One listing
> >>
> >>has
> >>
> >>
> >>>the SSID I entered and the other doesn't but most of the time the
> >>>RSSI
> >>
> >>
> >>>and LQ values are different for the two entries even though it's the
> >>>same radio (I know this because the MAC is the same).
> >>>
> >>>
> >>
> >>
> >
>
> --
> -- Matt Grommes --
> -- System Admin --
> -- SpinnNet --
> -- 505.938.7746 --
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
> the body type unsubscribe smartBridges)
> Archives: http://archives.part-15.org
>
--
-- Matt Grommes --
-- System Admin --
-- SpinnNet --
-- 505.938.7746 --
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
