Assuming all cables lengths are equal.. Like it better that I build the cable. Just need to test after crimping...
-----Original Message----- From: "Brian McWilliams" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Date: Tue, 1 Jul 2003 13:11:26 -0500 Subject: RE: [smartBridges] Tell me your horror stories about the AirBridge Total > One suggestion I would have is to integrate a RJ45 female jack into the > PowerShot instead, as (at least in our instances) it makes cabling > neater and simpler. It allows us to have the power shot farther away > from the network device it is plugging into. It would also allow > shorter > runs on the power, reducing the over length issues with the standard > power supply. > > > > Example: > > > > |ABo|------------50' cable to ABo---------|PowerShot and > Power|-------------------50' cable to > Network----------------------|Network Device| > > > > Thanks, > > Brian McWilliams > > Senior Wireless Administrator - A Wireless Gateway > > http://www.awirelessgatweay.com > > E-Mail: [EMAIL PROTECTED] > > Phone: 314-997-0300 x 2405 > > > > _____ > > From: sB Tech Support [mailto:[EMAIL PROTECTED] > Sent: Tuesday, July 01, 2003 12:54 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Tell me your horror stories about the > AirBridge Total > > > > Just need to clarify, is the connector need to recrimp refer to the > powershot's RJ45 Male connector? > > > > Alex > sB Tech Support > > > > > -----Original Message----- > From: [EMAIL PROTECTED] [ > mailto:[EMAIL PROTECTED] On Behalf Of Jeremy Oswalt > Sent: Wednesday, July 02, 2003 1:09 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [smartBridges] Tell me your horror stories about the > AirBridge Total > > > I agree . . . my indoor units work wonderfully . . . as well as the > outdoor . . .when I crimp them correctly. > > _____ > > Jeremy > > > -----Original Message----- > From: [EMAIL PROTECTED] [ > mailto:[EMAIL PROTECTED] On Behalf Of Joe > Sent: Tuesday, July 01, 2003 12:48 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Tell me your horror stories about the > AirBridge Total > > I have about 30 of the S/B's radios running 24/7. Have not skipped a > beat in months other than an interference problem once or twice. No > horror stories here. I have some of all of them out there. Even some > indoor units in plastic boxes outdoor. Joe > ----- Original Message ----- > From: "Scott Damron" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, July 01, 2003 11:22 AM > Subject: RE: [smartBridges] Tell me your horror stories about the > AirBridge Total > > > > I have only used the indoor airbridge, awhile back, 2-3 weeks, we got > a > > couple of new ones that were just bad. We had them RMA'd and have > not > > had anymore problems. We have one that is in use by a local > > municipality, it has to be rebooted every morning due to inactivity, > we > > have tried a couple of new cat 5 cables, but now work. We just kinda > > told them it was a "Feature" and they just reboot it automatically in > > the am each day before trying to get online. > > > > Scott > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Jeremy Oswalt > > Sent: Tuesday, July 01, 2003 9:14 AM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] Tell me your horror stories about the > > AirBridge Total > > > > > > Total . . . don't know. I use the outdoor product and the only > issues > > I've had were the periodic disconnects when the Ethernet is not used > for > > a while. Then you have to reboot the radio to get back online. I > later > > discovered that this was caused by poor crimps. The POE is extremely > > sensitive. I went back and recrimped a customer that was having this > > trouble and they have been online for two weeks. I imagine this is > the > > case on those with the same trouble with their APPO. I have gone to > > using outdoor shielded twisted pair and try to avoid cutting the jack > > off the ABO and crimping my own, since you can't test it. The new > ABO's > > with the shorter cables, should resolve this problem. > > > > _____ > > > > Jeremy > > > > _____ > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of D G > > Sent: Tuesday, July 01, 2003 2:49 AM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] Tell me your horror stories about the > AirBridge > > Total > > > > We going to try out an AirBridge Total here soon and want to know if > > anyone has any horror stories about them. Usually everyone says how > > great something is but this time I am looking for the bad news, how > may > > have you had to return, went dead, bugs in the firmware, etc. > > > > Lay it on me so I know what to look out for. > > > > TIA > > > > Don Grossman > > www.WillitsOnline.com > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > (in > > the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > (in > > the body type unsubscribe smartBridges) > > Archives: http://archives.part-15.org > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
