According to SB support, they have only tested RASPPPOE. We've tested the Linksys Cable/DSL router PPPoE login with both 0.09 firmware, and the newer firmware for the AirBridge and it does NOT work with the newer firmware. We went back to the older firmware and PPPoE works fine. Hopefully that will be fixed in the next firmware release.
Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Ray > Sent: Tuesday, July 15, 2003 6:10 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Bandwidth Hog > > > Does PPoE pass through the ABO? > > > ----- Original Message ----- > From: "Eje Gustafsson" <[EMAIL PROTECTED]> > To: "Dennis Burgess" <[EMAIL PROTECTED]> > Sent: Tuesday, July 15, 2003 5:34 PM > Subject: Re: [smartBridges] Bandwidth Hog > > > > Correct! > > > > > > > > Best regards, > > Eje Gustafsson mailto:[EMAIL PROTECTED] > > The Family Entertainment Network http://www.fament.com > > Phone : 620-231-7777 Fax : 620-231-4066 > > - Your Full Time Professionals - > > Mikrotik OEM reseller - Online Store http://www.fament.com/catalog/ > > -- > > searchable smartBridges mailing list archive. > > http://www.mail-archive.com/smartbridges40part-15.org/ > > -- > > DB> So, can I setup users to use the PPPOE featuers in the > router itself? > > > > DB> And if so, does that mean, each user has its own bandwidth settings? > > > > DB> Dennsi > > DB> ----- Original Message ----- > > DB> From: "Kevin Summers" <[EMAIL PROTECTED]> > > DB> To: <[EMAIL PROTECTED]> > > DB> Sent: Tuesday, July 15, 2003 10:01 AM > > DB> Subject: RE: [smartBridges] Bandwidth Hog > > > > > > >> > > >> It depends on how you set it up. If the MikroTik is providing > > >> your user authentication then you can set either default profiles > > >> or set the limits on a per user basis. If it's just passing your > > >> client traffic on to your network where you have some other method > > >> of authentication then you'll have to use queues, which as mentioned > > >> before every user that is assigned to that queue will share the total > > >> bandwidth of that queue if they are on at the same time. > > >> > > >> Kevin Summers > > >> KISTech Internet Services Inc. > > >> www.kistech.com > > >> -----Original Message----- > > >> From: [EMAIL PROTECTED] > > >> [mailto:[EMAIL PROTECTED] Behalf Of Jeremy Oswalt > > >> Sent: Tuesday, July 15, 2003 5:59 AM > > >> To: [EMAIL PROTECTED] > > >> Subject: [smartBridges] Bandwidth Hog > > >> > > >> > > >> Well . . . it finally happened. I added my first bandwidth hog. How > are > > >> you guys controlling your hogs? I'm working on putting a Mikrotik > router > > >> between my AP and my network, but that's at least a week away. I > think, > > DB> if > > >> I read it correctly, I can setup queues to limit their > usage. I can't > > DB> wait > > >> until Smartbridges allows for bandwidth control at the client. > > >> > > >> > > >> > > >> > > >> Jeremy > > >> > > >> The PART-15.ORG smartBridges Discussion List > > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > DB> smartBridges <yournickname> > > >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > DB> smartBridges) > > >> Archives: http://archives.part-15.org > > >> > > > > > > DB> The PART-15.ORG smartBridges Discussion List > > DB> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > DB> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > DB> Archives: http://archives.part-15.org > > > > -- > > [This E-mail scanned for viruses by Declude Virus] > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
