For it to work properly you have to use the old firmware and enable "none ip traffic" but then it works good.
Best regards, Eje Gustafsson mailto:[EMAIL PROTECTED] The Family Entertainment Network http://www.fament.com Phone : 620-231-7777 Fax : 620-231-4066 - Your Full Time Professionals - eBay UserID : macahan --- searchable smartBridges mailing list archive. http://www.mail-archive.com/smartbridges40part-15.org/ -- R> Does PPoE pass through the ABO? R> ----- Original Message ----- R> From: "Eje Gustafsson" <[EMAIL PROTECTED]> R> To: "Dennis Burgess" <[EMAIL PROTECTED]> R> Sent: Tuesday, July 15, 2003 5:34 PM R> Subject: Re: [smartBridges] Bandwidth Hog >> Correct! >> >> >> >> Best regards, >> Eje Gustafsson mailto:[EMAIL PROTECTED] >> The Family Entertainment Network http://www.fament.com >> Phone : 620-231-7777 Fax : 620-231-4066 >> - Your Full Time Professionals - >> Mikrotik OEM reseller - Online Store http://www.fament.com/catalog/ >> -- >> searchable smartBridges mailing list archive. >> http://www.mail-archive.com/smartbridges40part-15.org/ >> -- >> DB> So, can I setup users to use the PPPOE featuers in the router itself? >> >> DB> And if so, does that mean, each user has its own bandwidth settings? >> >> DB> Dennsi >> DB> ----- Original Message ----- >> DB> From: "Kevin Summers" <[EMAIL PROTECTED]> >> DB> To: <[EMAIL PROTECTED]> >> DB> Sent: Tuesday, July 15, 2003 10:01 AM >> DB> Subject: RE: [smartBridges] Bandwidth Hog >> >> >> >> >> >> It depends on how you set it up. If the MikroTik is providing >> >> your user authentication then you can set either default profiles >> >> or set the limits on a per user basis. If it's just passing your >> >> client traffic on to your network where you have some other method >> >> of authentication then you'll have to use queues, which as mentioned >> >> before every user that is assigned to that queue will share the total >> >> bandwidth of that queue if they are on at the same time. >> >> >> >> Kevin Summers >> >> KISTech Internet Services Inc. >> >> www.kistech.com >> >> -----Original Message----- >> >> From: [EMAIL PROTECTED] >> >> [mailto:[EMAIL PROTECTED] Behalf Of Jeremy Oswalt >> >> Sent: Tuesday, July 15, 2003 5:59 AM >> >> To: [EMAIL PROTECTED] >> >> Subject: [smartBridges] Bandwidth Hog >> >> >> >> >> >> Well . . . it finally happened. I added my first bandwidth hog. How R> are >> >> you guys controlling your hogs? I'm working on putting a Mikrotik R> router >> >> between my AP and my network, but that's at least a week away. I R> think, >> DB> if >> >> I read it correctly, I can setup queues to limit their usage. I can't >> DB> wait >> >> until Smartbridges allows for bandwidth control at the client. >> >> >> >> >> >> >> >> >> >> Jeremy >> >> >> >> The PART-15.ORG smartBridges Discussion List >> >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> DB> smartBridges <yournickname> >> >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >> DB> smartBridges) >> >> Archives: http://archives.part-15.org >> >> >> >> >> DB> The PART-15.ORG smartBridges Discussion List >> DB> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe R> smartBridges <yournickname> >> DB> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe R> smartBridges) >> DB> Archives: http://archives.part-15.org >> >> -- >> [This E-mail scanned for viruses by Declude Virus] >> >> The PART-15.ORG smartBridges Discussion List >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe R> smartBridges <yournickname> >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe R> smartBridges) >> Archives: http://archives.part-15.org >> R> The PART-15.ORG smartBridges Discussion List R> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> R> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) R> Archives: http://archives.part-15.org -- [This E-mail scanned for viruses by Declude Virus] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
