It has been our experience that "half" duplex is the setting on the Ethernet port....the radios (sB).
-George M. Walden on 7/17/03 9:25 PM, Roger Howard at [EMAIL PROTECTED] wrote: > I have a customer who just bought a new PC. They asked me to set it up to > access my fixed wireless service for them. OK, should be straight forward.. > but when I set it up, the speed is very inconsistent. Pages sometimes take a > while to load. It was strange because ping times were all excelent. > > Anyway, I tracked it down to the NIC. It was set to Auto, but when I set it > to 10Mbit half duplex, the problems went away. > > So what is the ideal setting if you have to set this manually, when it's > plugged directly into a smartBridge unit? I know the smartbridges have a 10 > Mbit ethernet port, but is it half duplex or full duplex? > > Thanks, > Roger > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
