Okay this bug of it NOT associating at distances and having througput problems was identified in the 1str revsion! why was that bug not persued to beging with when I gave them feedback on it instead of proceedig forward like as if I was smoknig CRACK! now look I get on this list and lots of people are havin ghe SAME exact prblem I had while doing the orginal beta test with 0.01.06 revs one, two and 3!
I was asked to try the firmware and I gave valid input yet that imput has seemed to fall on deaf ears? Quoting phantam <[EMAIL PROTECTED]>: > Sully there working on checking the problem I believe I saw, remember it's > a > beta so it is going to be bug ridden hence why they said not to mass deploy > it. > > I take it they had a feeling problems like this were going to arise that's > probably why it was released as a beta with all the warnings because it was > a rush beta to get the kinks out in the field because really in design > testing can only show 1/100th of the possible problems that can occur in > software especially firmware for hardware. > > Chris > -----Original Message----- > From: The Wirefree Network [mailto:[EMAIL PROTECTED] > Sent: Saturday, July 19, 2003 10:57 PM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] > > I see you are responding to some posts...and I have never known sB to > NOT monitor this forum 24x7. So...where is your response to our > problems with this firmware?? > > Please....we have been patient on this issue...but at least let us know > that you acknowledge the problem we are having and are working hard (as > usual) to fix it. > > Loyal sB user! > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Saturday, July 19, 2003 12:35 PM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: RE: [smartBridges] New Firmware not working for me > > Repost due to ZERO response from sB on this issue. > > Why is this firmware not allowing association to some aPPo's??? > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Friday, July 18, 2003 5:15 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] New Firmware not working for me > Importance: High > > Here in my lab, I have a suspected bad unit. I upgraded the firmware, > and it will NOT reassociate with the intended aPPo. I switched the > SSID/Freq to my other aPPo and it associated right up. I did this about > 5 times both ways. Every time it was the same. I downgraded the > firmware back to (0.01.04) and it associated right up with the intended > aPPo. Upgraded again and it lost association. > > I have confirmed that there are ABSOLUTELY no differences in the > settings of my two aPPos except for this: > - Different SSIDs > - Different freq's > - One is new aPPo with short pigtail, one is older aPPo with hardwired > CAT5 > > > The unit that I can not associate to is the older unit. None of the > older sB equipment is having any problems. Everything is on the older > firmware as well: > aPPo = 1.4j.5 > airBridge indoors = 0.01.04 (tried upgrading to 0.01.06) > > Of the 17 I installed in the last 2 weeks, three are experiencing the > "lost association" problem. I replaced all 3 units (including POE > units) and all 3 are still having problems. That is VERY odd. Although > I did receive all these units (30) at the same time (almost all > consecutive MAC addresses). > > Still doesn't explain why only these 3 are having problems and none of > the other 14. I wouldn't think it was too odd if it weren't for the > fact that I R&R'd all 3 units and they are still losing association, > whereas all the other 14 new clients are humming right along. > > I really think there is something more to this. > > No...it is not frequency or multipath or whatever. I have sniffed out > the entire area. They are clean and very good RSSI/LQ. > > All 17 of these installs are within a half mile of the aPPo and clear > LOS. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree > Network > Sent: Friday, July 18, 2003 4:09 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Anyone having issues with the new firmware? > > name of the device is just airbridge. I dont have any more client info > entered in any of my devices. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of The Wirefree Network > Sent: Friday, July 18, 2003 4:51 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Anyone having issues with the new firmware? > > > 1. Older aPPo (about 3 months old..older type unit with hardwired CAT5) > running 1.4j.5 firmware. > 2. Client airBridge indoor units are running older firmware as well > 0.01.04. > 3. SSID is only 3 characters long > 4. Preupgrade RSSI and LQ was in the 90's for both (when associated of > course). > > I am wondering if I need the newer firmware on all devices first of all, > then load the BETA firmware on the suspect devices???? > > I had held off on the last round of firmware upgrades due to others > experiencing problems. I am about to try another upgrade here in my lab > with one bad unit. Will keep you posted! > > Sully > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Tom Haynes > Sent: Friday, July 18, 2003 4:37 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Anyone having issues with the new firmware? > > > Mike and Sully. What FW are you running on the AP that the upgraded > units > will not associate with? What was your pre-upgrade RSSI and LQ? What is > the > length of the ESSID on the AP that the units will not associate with? > > Mike, are there anyother differences between the APs that the upgraded > units > will assoiate with and the APs they will not associate with? > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of The Wirefree Network > Sent: Friday, July 18, 2003 6:31 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Anyone having issues with the new firmware? > > > I tried to upgrade one of 3 freezing units and it would not associate > with > the AP. This is the only AP within range of all 3 units, so I dont know > what to do at this point. > > I had to downgrade back to old firmware to reassociate. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Michael Saathoff > Sent: Friday, July 18, 2003 12:29 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Anyone having issues with the new firmware? > > > Update, > I have 7 AP's running the same firmware. For some reason upgrading the > firmware on the AirBriges kills their ability to associate with two of > seven > AP's. I can associate with any of the other five and all seems to be > working well. > > Not sure why yet. > > --Mike > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Michael Saathoff > Sent: Friday, July 18, 2003 12:20 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Anyone having issues with the new firmware? > > > Sam, > It either works or it dosen't.....Sounds funny but, what I mean is that > the > upgrade seems to resolve the heat issue. Though I haven't had any real > heat > the last couple days. The bad side is that it seems to kill my ability > to > associate with some of my AP's. > > --Mike > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Sam > Sent: Friday, July 18, 2003 12:09 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Anyone having issues with the new firmware? > > > Has anyone installed the new firmware? I'm getting ready to try, but > wanted > to check first to see what sort of luck others have had. > > Thanks > Sam > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the > body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the > body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the > body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the > body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
