Re: [smartBridges] trying to get MRTG to work on my desktop machine

[Blazen Wireless]

Title: Message

Where do I go to see if that file or app is loaded on my PC? SEE below   ----- Original Message ----- From: rich To: [EMAIL PROTECTED] Sent: Sunday, July 20, 2003 11:05 AM Subject: RE: [smartBridges] trying to get MRTG to work on my desktop machine try doing:   snmpwalk hostname community  DO I type this in a command prompt within the mrtg folder like the other commands??     see if it outputs something..   also, did you install the snmpd service on the windows box?   snmpwalk should be there, i know on unix installs it is -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless Sent: Sunday, July 20, 2003 12:22 PM To: [EMAIL PROTECTED] Subject: [smartBridges] trying to get MRTG to work on my desktop machine Importance: High I loaded per the instructions and this is what I get when trying to run from the command prompt per the instructions, am I doing something wrong??     Win 2000 machine 2 nic cards one public IP one private for simple monitor etc. No web server software on this machine just the basic windows install do I need IIS install too?   C:\mrtg-2.10.0pre5\bin>perl cfgmaker [EMAIL PROTECTED] --global "WorkDir: c:\www\mrtg" --output mrtg.cfg --base: Get Device Info on [EMAIL PROTECTED]: SNMP Error: no response received SNMPv1_Session (remote host: "10.0.0.12" [10.0.0.12].161)                   community: "public"                  request ID: -959681549                 PDU bufsize: 8000 bytes                     timeout: 2s                     retries: 5                     backoff: 1) SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]::::::v4only WARNING: Skipping [EMAIL PROTECTED]: as no info could be retreived   --base: Writing mrtg.cfg   Thanks Martin Moreno Blazen Wireless