3 letters only. This is a new problem that started when I installed the new aPPo at our head-end. Before that...no problem.
Once factory defaulted, no problems logging in. Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Todd Barber Sent: Thursday, July 24, 2003 11:31 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Cant log into units?? This is the problem I was having with the APPO in client bridge, wireless bridge, or repeater mode. We were able to get it narrowed down to the length of our ESSID. Once we shortened our ESSID no more problems. The SB tech guys also provided us with the super password for our APPO units. This allows you to log in even if the ESSID is longer than 23 characters. Out of curiosity do you use a very long ESSID? We were using our company name. Todd Barber Skylink Broadband Internet [EMAIL PROTECTED] 970-346-1834 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree Network Sent: Thursday, July 24, 2003 12:09 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Cant log into units?? Wow...this has me really stumped. If I get the client to do a "restore to factory default", then I can log right in. If I wirelessly use simpleDeploy on the airPoints (airBridges down allow this), then I can log right into the units. Otherwise, I can not log in. I get this error message "Can not Read the airBridge Configuration...Check your password." Please...does anyone have a clue on what could be causing this?? Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree Network Sent: Saturday, July 19, 2003 11:20 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Cant log into units?? BTW...I did not upgrade any of these units to the new BETA firmware. So...it's not that either. As a matter of fact, I haven't done anything to these units. I bet that a manual "restore to factory default" by the client would allow me to log in again. But....being that the units are working still, I really don't want to bother the client. Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree Network Sent: Saturday, July 19, 2003 11:11 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Cant log into units?? MORE INFO: Rebooting the devices with simpleNMS does NOT work. I still can not log into 75% of my units (aP, aPPo, aB, aBO). I used simpleDeploy to reflash the "bad" aPPo-CB units (aPPo's and aP's are the only ones I can still wirelessly use simpeDeploy on). Once I reflashed them with simpleDeploy, I was able to log in as normal with simpleMonitor. 1. simpleDeploy uses the ADMIN password. So...obviously, I know my passwords. So...please don't suggest bad password. 2. I have simpleNMS loaded with my ADMIN passwords as well, and I am able to see stats and perform reboots. Once again proving that I know all my passwords. 3. MRTG is polling the units every 5 minutes with the USER passwords. One last time proving that I know my passwords. So....why am I all of a sudden unable to log into 75% of my units (very old and very new units)?!?!?! Why does reflashing them with simpleDeploy fix the problem??? About 30 of my units are aB or aBo's, so I cant use simpleDeploy to fix the problem. Anyone have any suggestions??? Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree Network Sent: Saturday, July 19, 2003 9:58 PM To: [EMAIL PROTECTED] Subject: [smartBridges] Cant log into units?? For some odd reason, I can not log into a lot of my units using simpleMonitor. I have tried both the admin and user passwords as well. To add to the oddness, simpleNMS is able to talk with all the units (obtaining their stats, etc). But when I choose MANAGE (which opens simpleMonitor--also using my ADMIN password), I get the "Can not read...check your password" crap. Same thing happens when I try to open it with simpleMonitor directly. More oddness....MRTG is polling the units just fine, obtaining their usage, RSSI and LQ...using the USER password. I am stumped. I don't know when this started...cause I don't normally log into the units unless there is a problem. I had one that wouldn't let me in today, so I tried all of them. To recap...I can not log into over half of my units (about 35 of the 45) using either the ADMIN or USER password What the heck I am doing wrong....duh....am I forgetting something really stupid??? Sully The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
