Yes, I can ping the units just fine. I included a transcript of the network traffic between one of the airBridges and the box I'm comming from so you can see. I'm sending ICMP packets to the unit, and their comming back...
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of sB Tech Support Sent: Friday, July 25, 2003 5:38 To: [EMAIL PROTECTED] Subject: RE: [smartBridges] "Invalid Device!" message... Hi Shawn, Please ensure that you can PING or search the device before upgrading the firmware on the airBridge. Please remember that the device required to cool down (if it is heat related issue) about 15 minutes before upgrading the new firmware. Thank you. Seeni, SB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shawn Mitchell Sent: Friday, July 25, 2003 2:44 PM To: 'smartBridges' Subject: [smartBridges] "Invalid Device!" message... I'm getting this message also while trying to upgrade two airBridge's remotely... and I keep getting the error message of "Invalid Device!" the airPoints upgraded just fine... but the airBridges won't upgrade... any suggestions? The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
