|
Need to go to ACE Hardware
and get a yellow one. The cops will leave
you alone then.
;-)
Oh forgot to mention I got me one of those Radio
shack red Rotating lights to put in my back window too. Wonder if a cop
is going to stop me! :) Need to get some magnetic signs made
up.
Dennis
----- Original Message -----
Sent: Friday, August 08, 2003 12:48
AM
Subject: RE: [smartBridges] Best and
simplest deployment tools
Take a picture, I want to see that!
Going to do some testing tommorrow. Got
me a 20 foot pole and a tripod to test with. Drop a omni or maybe just
tape that awsome ABI to the top of it! hehehe
Dennis
----- Original Message -----
Sent: Friday, August 08, 2003 12:45
AM
Subject: Re: [smartBridges] Best and
simplest deployment tools
Acutally, we got a 1.25 mile link today with
a 19db grid. Just have to get out far enough. I think maybe
the prob is that we are trying to grab too close to our tower, under .25
miles. And cause of that, it has to go though solid trees to get
there.
Dennis
----- Original Message -----
Sent: Friday, August 08, 2003 12:31
AM
Subject: RE: [smartBridges] Best
and simplest deployment tools
Just checking. I was thinking of the WISP24013 and WISP24019
which lets you choose orientation depending on which way you attach the
mounting bracket to the antenna.
The only way I know how to mount it on a
vertical pole with the Vertical arrow pointing up.!
Dennis
----- Original Message -----
Sent: Thursday, August 07, 2003
12:22 AM
Subject: RE: [smartBridges] Best
and simplest deployment tools
Just a thought (I'm still catching up with the list). Are you
sure that your maxrad 14dB antenna is mounted for vertical polarity? I
think you can mount those both ways.
thats not always the answer you should be
getting at least 2-3 miles with NO amp I had mine at H pol and at 2.5
miles was able to get 600 up and down easy further out the upload went
down some as well. What polarity is the ant I am assuming V pol since
you are using the mobile omni I would seriously do a site survey to
see what's in the area causing possible interference. Then if thats
the case I would go the pac wireless 360 H Pol omni or two of the 13
db 95* h pol sectors on two separate radios.
----- Original Message -----
Sent: Wednesday, August 06,
2003 5:57 PM
Subject: RE: [smartBridges]
Best and simplest deployment tools
Amp it!!
Scott
No prob: )
I have one APPO currently, it has a 2
inch N Ginder changer then plugs into the N connector on the 8
inch pigtal off a MaxRAD WISP 14db 90degree antenna. No AMP
just the APPO direclty to the antenna. It is currently about
80 feet up with the sourrounding trees at 50-60 feet up. The
area is heavy trees, but we are above them. I can get good
coverage anywhere within .25 miles with just a ABI. I get
better singal when I use a ABO with 12 feet of RG5 (whatever comes
with the mag mount from pac wireless) connected to a 7db mobile
antenna. I can get about .75 miles out with just the ABI in
one spot on the road. Other than at, I hav'ent got much
else. I have tried from a hill with a good line of sight to
the APPO. I have a ABT, that just sux so far!
Any other suggestions?
Dennis
----- Original Message -----
Sent: Wednesday, August 06,
2003 7:48 PM
Subject: Re: [smartBridges]
Best and simplest deployment tools
1st off you need to give us details
one how you have the APPO set up on a tower on a hill on a
house, does it have an omni if so what type what polarity etc.
Did you do a site survey in that area to see if there is
interference especially if you are vertical polarity! if there
is which I suspect then I would suggest going H polarity. Until
we know your layout we can offer much more.
----- Original Message -----
Sent: Wednesday, August
06, 2003 4:14 PM
Subject: [smartBridges]
Best and simplest deployment tools
I have been having a hard time
getting signal. Most of my customers are around 40% RSSI
with Airbridge Indoors and are working well so far. But,
all these locations are within a mile of my Tower. I
have a VERY hard time getting anything over a mile!
Anyone wish to give me some
pointers? I have been using a AirBridge Outdoor plus a 7db
omni mag mount from Pac Wireless and a 19db grid from Pac to
test for signal. But it really stinks when I don't even
know if my signal from the tower is getting to me.. The
only thing I have is SimpleMonitor, which takes some time to
assoicate sometimes.
Dennis
|
