I'm still wondering why
in SimpleNMS when I'm looking at the Client Info tab
of an access point that
it doesn't show the RSSI and Link Quality of the clients,
even though the ability
seems to be there. I get "N/A".
The APs are AirPoint
Indoor and the Clients are AirBridge Indoor and Outdoor
running 0.01.07 firmware,
which should be showing this information.
right side with the MAC
ending in E9 is running the latest firmware, but I don't
get any readings in this
screen for it. If I look at just that radio and go to it's
Statistics tab it shows
the RSSI and LQ just fine.
Any ideas why it doesn't
show in this view?
I
have both versions of simplemonitor and simplenms. The latest versions
do not show the ip address. Unfortunately there were too many people that
whined and complained aobut what the ip address meant that they removed it
so that there would be no confusion. I would like to see it return as it is
much easier to match up an ip (95% of the time it showed the ip of the
customersmachine or router) than to match up an mac address. Though
the infomation is likely avaible in simpleNMS to match up mac address with
the more user name of the radio and display that.
Kind Regards,
David
David Blood
Account
Executive
SpeedyQuick Networks, Inc
Boise,
Id
[EMAIL PROTECTED]
208-284-5505
Sounds like he's
talking about the IP shown in the "Client Info" tab,
which
I've never seen an IP
listed there, just a MAC address. It's worth noting
that
I would LOVE to see
an IP address listed there along with the MAC, but
I would rather see
the APs signal strength that it's picking up from the
CPE.
Not the value on the
CPE, but what the AP sees.
Anyone want to weigh in on this? Seems to
me that it would be useful to see IP's in SimpleMonitor. I think
something got lost in Alex's translation. I don't understand his
explanation.
Regards,
Bobby Bounds
Airwave Internet, LLC
----- Original Message -----
Sent: Tuesday, August 05, 2003 11:15 AM
Subject: RE: Why are IP's gone....
Hi
Bobby,
You are
referring the IP address shown in Client Info Tab? As the IP address
displayed is random and does not reflect the correct device and due to
this confusion or inaccuracy, we have removed this IP info in our latest
simpleMonitor.
-----Original
Message-----
From:
Bobby Bounds [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 05, 2003
11:43 PM
To: sB Tech
Support
Subject: Why
are IP's gone....
....from the
latest versions of SimpleMonitor? It was helpful to be able to see the
devices by IP.
