Yes, 1 will enable traps which is the default (I think). Listen on port 162 for incomming traps. There is a list of all traps as well as a brief description for each in the MIB file which is located in the simpleMonitor directory.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jack Berridge Sent: Thursday, August 21, 2003 4:41 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] SNMP Traffic Tom, This is pretty cool. I was not aware that we could even enable the Smartbridges equipment to send traps.....I thought we could only get events via SNMP polling. To enable traps, would you set the OID to 1 (or what)? Thanks. Jack At 04:17 PM 8/21/2003 -0500, you wrote: >Tell it to disable traps. I don't see the switch in simpleMonitor so you >will have to send an SNMPput command to OID 1.3.6.1.4.1.410.1.1.1.3.0 and >set it to 2. This will disable SNMP traps. A lot of traps from an APPo >indicates a problem, most likely association/dis-association events. > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >On Behalf Of Lewis Watson >Sent: Thursday, August 21, 2003 1:37 PM >To: [EMAIL PROTECTED] >Subject: Re: [smartBridges] SNMP Traffic > > >No. The only monitor software is on this machine (and it's not running) >Thanks! >Lewis > >----- Original Message ----- >From: "Kevin Summers" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Thursday, August 21, 2003 1:19 PM >Subject: RE: [smartBridges] SNMP Traffic > > > > > > Is someone running a monitor on it? > > > > Kevin Summers > > KISTech Internet Services Inc. > > www.kistech.com > > > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of Lewis Watson > > > Sent: Thursday, August 21, 2003 11:12 AM > > > To: [EMAIL PROTECTED] > > > Subject: [smartBridges] SNMP Traffic > > > > > > > > > I have an apPo that is contstantly sending SNMP packets out on the > > > network. Is there a way to have it not do this yet remain functional >as an > > > AP? > > > Thanks! > > > Lewis > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > > unsubscribe smartBridges) > > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) > > Archives: http://archives.part-15.org > >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) >Archives: http://archives.part-15.org > >The PART-15.ORG smartBridges Discussion List >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >smartBridges <yournickname> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >smartBridges) >Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
