As far as I know, there is no way to set the NMS station's IP address at this time. It is all done with broadcasts. It could be changed but it would require a firmware update.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Castella Sent: Friday, August 22, 2003 7:30 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] SNMP Traffic Along with an enable/disable traps function, there should be an IP address for the SNMP management station. The log on my Cisco BR340 AP is full of entries for "Console Connection Attmepts" from the sB client. ----- Original Message ----- From: "Tom Haynes" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 22, 2003 12:42 AM Subject: RE: [smartBridges] SNMP Traffic > Yes, 1 will enable traps which is the default (I think). Listen on port 162 > for incomming traps. There is a list of all traps as well as a brief > description for each in the MIB file which is located in the simpleMonitor > directory. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Jack Berridge > Sent: Thursday, August 21, 2003 4:41 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] SNMP Traffic > > > Tom, > > This is pretty cool. I was not aware that we could even enable the > Smartbridges equipment to send traps.....I thought we could only get events > via SNMP polling. To enable traps, would you set the OID to 1 (or what)? > > Thanks. > > > > Jack > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
