The device IS NOT functioning either on the wireless side or on the ether.
side.

The only light working on the radio is the orange and it constantly flashes.

The light on the power injector also flashes until the cat 5 that runs to
the radio is unplugged from the power injector - at that point, the light on
the power injector stays on solid - when the cat5 from the radio is plugged
back into the pwoer injector, the green light on the power injector starts
flashing again.

Mickey

----- Original Message -----
From: "sB Tech Support" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 02, 2003 6:37 PM
Subject: RE: [smartBridges] Lost ether. / radio


> This is pretty new case. Is the device functioning now after pulling the
> cat5 cable? Do you mean there isn't Cat5 cable connected earlier? Does
> both the Ethernet and wirelessly working (can associate and pass
> traffic)?
>
> Alex
> sB Tech Support
> [EMAIL PROTECTED]
>
>
> -----Original Message-----
> From: Mickey [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, September 03, 2003 6:08 AM
> To: [EMAIL PROTECTED]
> Subject: [smartBridges] Lost ether. / radio
>
> Have a customer using ABTot since early June - powered down everything
> to
> leave for the holiday weekend - came back today and powered up - on the
> radio no blue (tx/rx) light, no green (pwr) light, flashing orange light
> and
> flashing green light on pwr injector/pod - no link light on his NIC when
> connected to the pwr injector - when he pulls the cat5 running to the
> radio
> from the pwr injector, the pwr injectors green light stays on solid.
>
> This radio was out of a group from 3/24/03 or 5/1/03.
>
> Taking the recovery utility and a new pwr injector to his house.
>
> Does this fit any of the various failure scenerios seen over the last
> three
> months?
>
> Thanks for any suggestions,
> Mickey
>
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to