I had the same question and was told that this: "Is it advisable to use aPPO in client bridge mode at the base station. If you want to use airBridge, then it has to connect to a router with transparent bridge firmware. Because airBridge with newer firmware, it does Mac translation, so you can't pass traffic to internet in that setup. "
So this setup is preferred: Base Station----aPPO (CB)-----------aPPO (AP)----------Wireless clients. With this, it is transparent bridge and can support multimac. Alex sB Tech Support [EMAIL PROTECTED] In theory I think this is fine because the Airbridge at the customer recive and send information to the internet. I think that you can connect the Airbridge to the router or switch>>>connect using wireless to the APP0 and have our customers connect to that APPO using wireless. (wired)router>>>Airbridge>>>>APPO>>>Customers using Airbridge indoor or outdoor. Is this what you did? -- Rudolph Worrell President Phone:(540)664-3950 Fax:(270)458-6431 www.wave2net.com Quoting Pascal Losier <[EMAIL PROTECTED]>: > According to smartbridges, we can't do backhaul with an airbridge. > > For some reason Im testing with an Airbridge & it works ! > > I only hook up tree custumer with this wipop. > > Apparently, Airbridge is not transparent bridge like an APP. > > > > Why is it working ??? Im afraid to deploy with an airbridge,,, > > Maybe I should look for another CPE for backhaul. > > ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
