Could you all not have a toggle in the newer firmware that would allow you to go to single-mac transparent bridging? I mean, the AirBridges with the chip problem won't be able to run the older firmware...
----- Original Message ----- From: "sB Tech Support" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, September 04, 2003 4:54 PM Subject: RE: [smartBridges] Backhaul with Air bridge. > If the airBridge is connected directly to the router and with old > firmware (transparent bridge), this will work. > > Please refer to this FAQ > http://www.smartbridges.com/new/support/faq_ab.php#155 > > Alex > sB Tech Support > [EMAIL PROTECTED] > > > -----Original Message----- > From: Rudolph Worrell [mailto:[EMAIL PROTECTED] > Sent: Friday, September 05, 2003 4:42 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Backhaul with Air bridge. > > I had the same question and was told that this: > > "Is it advisable to use aPPO in client bridge mode at the base station. > If > you want to use airBridge, then it has to connect to a router with > transparent bridge firmware. Because airBridge with newer firmware, it > does Mac translation, so you can't pass traffic to internet in that > setup. " > > So this setup is preferred: > Base Station----aPPO (CB)-----------aPPO (AP)----------Wireless clients. > > > With this, it is transparent bridge and can support multimac. > > Alex > sB Tech Support > [EMAIL PROTECTED] > > In theory I think this is fine because the Airbridge at the customer > recive and > send information to the internet. > > I think that you can connect the Airbridge to the router or > switch>>>connect > using wireless to the APP0 and have our customers connect to that APPO > using > wireless. > > (wired)router>>>Airbridge>>>>APPO>>>Customers using Airbridge indoor or > > outdoor. > > Is this what you did? > > > > -- > Rudolph Worrell > President > Phone:(540)664-3950 > Fax:(270)458-6431 > www.wave2net.com > > > Quoting Pascal Losier <[EMAIL PROTECTED]>: > > > According to smartbridges, we can't do backhaul with an airbridge. > > > > For some reason Im testing with an Airbridge & it works ! > > > > I only hook up tree custumer with this wipop. > > > > Apparently, Airbridge is not transparent bridge like an APP. > > > > > > > > Why is it working ??? Im afraid to deploy with an airbridge,,, > > > > Maybe I should look for another CPE for backhaul. > > > > > > > ------------------------------------------------- > This mail sent through IMP: http://horde.org/imp/ > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > 4Ӕ4! �â{_�� ��+z���ߢ��H��4�a��� > 0�+)r���?�����\�x�����'��m�8^<Sד�ɚ��k�� �8�r�,��ˊ�S��"�f���"������j�u���{ay� �ܩz˛���m�&j�A�'`z̨���rIڙ��E騽隊[h�f���索�ך+�)���w+r�맲��r��zɚ��k�� � ܆+m��ڭ�b��)j�u��
