Is there any chance that the airBridges could act like airPointPro's in CB mode?
It would be really nice to see the air bridge's mac address only for traffic coming from the IP address of the airBridge itself. On Wed, 2003-09-10 at 09:59, Vasu (sB Tech Team) wrote: > · The airBridge with the firmware version 0.09.10 is a > transparent bridge and supports only single PC. > > · The airBridge with the firmware version 0.01.04 and later > supports multiple MAC addresses but does MAC translation of the PCʼs > MAC address when requesting for an IP address from the DHCP server, > however if you see at the main packet level header you will see the > airBridgeʼs MAC address and the Bootp level you shall see the PCʼs MAC > address. > > · The airPointPRO in CB mode any firmware just passes the PCʼs > MAC address while requesting for an IP address from the DHCP server, > without doing any MAC translation while supporting multiple MAC > addresses. > > > > I hope it clarifies. > > > > > > > > With Best Regards, > > > > Vasu > > > -- Scott Brooks Network Operations Analyst Binary Solutions Ltd. [EMAIL PROTECTED] ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
