UPDATE

Sorry this is off topic but remember how I told you a competitor around here
was pissed and making accusations??? Well the harsh reality has hit. Last
night at my night job the TELCO I was interviewed by our corporate security
over this guys accusations of me attacking his system from our place of
business (Telco) well they only reason for the investigation was because
this idiot called and complained.

Turns out they investigate his claims and basically told him sorry not our
employee! well now they did a full 2 hour interview asking me why I did not
ask them before starting the WISP your in direct competition with us,
conflict of interest yaddy yaddy yaddy. Well my story and this is the gods
honest truth is... If the TELCO I work for IS NO currently servicing this
area and never will and then how could it be a conflict of interest? They
kind of were lost on that one and are going to finish the investigation in
the next few days and my partner and I could be losing our jobs!! so now we
are in a bind and HAVE to make this work BIG time and find other jobs to
support our families.

I am soo pissed I am going to BURY this ass for making the accusations and
of course like we told him he was on crack it was not us which our company
proved. So now we are going to REALLY go after him and his clients and blow
his doors down by outdoing him in sales and doing MASS marketing around
here!..

My question I have been wondering all morning is this. Legally can we do
anything to him since he made false accusations and they were proved wrong?
should we pursue this Ave or will it backfire if they fire us because they
think it is a conflict of interest??

as much as I hated the new job we were doing I did not want to leave or get
fired at least not now. The good thing I guess is that we are starting 3
weeks vacation tomorrow and well we may not be coming back!

Spiritual, legal and just plain support is appreciated!!!!!!

Thanks
Martin & Steve..



----- Original Message ----- 
From: "Tom Haynes" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 21, 2003 3:01 AM
Subject: RE: [smartBridges] Beta 1.0.08 locking up Ethernet anyone else??


I would like to know what results everyone get if they look at the
ethernet traffic on effected and non-effected radios. Log in to
simpeMonitor and pull up a client. Go to the 'Statistics' tab and click
on the 'Extended View' for Ethernet. Try this befor the radios lockup.
On the Transmitted side:
You should see zero collisions of any kind on the transmited side unless
the radio is plugged in to a hub with two or more other devices
attached. If you see any, make sure all devices connected are set to
10BaseT/Half Duplex. I have only seen this happen on radios connected
directly to the clients computer. CRC Errors should also be zero. If it
is excessive compared to 'Total Packets' then the cableing is probably
bad. If you see any 'Pause Frames' and the clients is not running a 386
computer, then you can guess that the TCP/IP stack in the OS is Fragged
or the buffer in the NIC is going bad. 'Single Defer Packets' should
also be low or zero and are caused by congestion on the ethernet side.
Add a router to help solve this problem.
On the Received side:
CRC Errors usually indicate that the NIC is faulty. Unknown OP Codes
come from trying to use VLAN tagging or other Layer 1 extensions that
are not supported. Check the protocols attached to the LAN port on the
computer. Just about every other error indicated a bad NIC or damaged
cableing except for Oversized Packets. An oversized packet is generally
caused by a late collision which indicated that the ethernet cable is
too long (over 300') or the network diamater is to large (over 1500' to
the farthest client with no more than 2 repeaters IE Hub, switch,
etc...).
If you see anything other than zeros below received broadcast packets or
transmitted unicast packets let me know. I am trying to study ethernet
errors for the smartBridges MIB Hadbook.

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org


----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to