It would be really nice if Smartbridges were to actually certify at least one if not several power supply options.
When we start talking about "be careful of the smoke" we are just guessing and in this business there is no room for guess work. If we had a certified product recommended from Smartbridges I think we would all feel better about using it and in the event we needed support on a problem from SmartBridges we would know we are using certified equipment to rule that out. I am awaiting the release of the POE outdoor. Even though I have no intentions on using it outdoors it does provide for a higher voltage level for long cable runs as well as some surge protection the way I understand it. Not the cheapest solution but just like anything else you get what you pay for. Something bothers me about going out to the local Radio Shack for a power supply to run my AP's etc.. Not to knock Radio Shack but this is a situation that needs a commercial grade type solution, not an 18VDC power supply intended for the general public. -----Original Message----- From: John Hokenson [mailto:[EMAIL PROTECTED] Sent: Friday, November 07, 2003 1:29 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] 18v power? Mouser Electronics.... JH ----- Original Message ----- From: "Jeremy Oswalt" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, November 06, 2003 6:41 PM Subject: [smartBridges] 18v power? > Okay, I can't seem to find the articles in the archive concerning where to > get an 18v DC power supply that works with the Smartbridges. I know > Smartbridges is coming out with one, but I can't wait another week. I need > two for a 170' run. Any recommendations? > > _____ > > Jeremy > > _____ > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
