Is client to client communciation disabled?

----- Original Message ----- 
From: "Eje Gustafsson" <[EMAIL PROTECTED]>
To: "Shane Warren" <[EMAIL PROTECTED]>
Sent: Saturday, November 22, 2003 8:55 PM
Subject: Re: [smartBridges] Point to Point can't access


> What port do you have set as primary port ? I would assume the
> ethernet.. If you check out the manual you will find out a few very
> important things about the primary port.
>
> Best regards,
>  Eje "Aya" Gustafsson                 mailto:[EMAIL PROTECTED]
> The Family Entertainment Network      http://www.fament.com
> Phone : 620-231-7777                  Fax   : 240-376-7272
>             - Your Full Time Professionals -
>         Online Store http://www.wisp-router.com/
>  MikroTik, Star-OS, PACWireless, EnGenius, RF Industries
> -- 
>
> SW> We have a customer that said about 3 months ago they were not able to
see
> SW> there point to point shot anymore on simple NMS or simple monitor.
> SW> Yesterday we went out there to see if we could fix there problem with
no
> SW> luck. From there office you can see the APPO's on the tower, but you
can not
> SW> see the office to the tower point to point.  They seem to be
invisible, you
> SW> can't ping them either.  If you unplug either side of the point to
point
> SW> from the switch and plug it directly into your laptop you can see the
point
> SW> to point then but not the other 3 APPO's.  Everything is set up
correctly,
> SW> we tried it in wireless bridge mode, and APPO in AP mode - APPO in CB
mode,
> SW> neither way made any difference, we double checked all the numbers and
> SW> everything is the way it is supposed to be.  Everything works, I just
don't
> SW> know why all of a sudden we can't ping the units or get into them
remotely.
> SW> We also tried resetting them back to factory default and reprogramming
them,
> SW> the only thing different from the 3 APPO's on the tower and the point
to
> SW> point is the there is not WEP key in the point to point, but I don't
think
> SW> that should make a difference in monitoring them or accessing them
remotely.
> SW> Any help would be greatly appreciated.
>
> SW> Shane Warren
> SW> ATW Wireless
>
>
> SW> The PART-15.ORG smartBridges Discussion List
> SW> To Join: mailto:[EMAIL PROTECTED] (in the body type
> SW> subscribe smartBridges <yournickname>
> SW> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> SW> Archives: http://archives.part-15.org
>
> -- 
> [This E-mail scanned for viruses by Declude Virus]
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org
>


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to