At the base of the point to point we have the primary port set in Ethernet and at the tower it is in wireless. That is for the point to point, and the other 3 APPO's at the tower are set in Ethernet for the primary port.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eje Gustafsson Sent: Saturday, November 22, 2003 8:55 PM To: Shane Warren Subject: Re: [smartBridges] Point to Point can't access What port do you have set as primary port ? I would assume the ethernet.. If you check out the manual you will find out a few very important things about the primary port. Best regards, Eje "Aya" Gustafsson mailto:[EMAIL PROTECTED] The Family Entertainment Network http://www.fament.com Phone : 620-231-7777 Fax : 240-376-7272 - Your Full Time Professionals - Online Store http://www.wisp-router.com/ MikroTik, Star-OS, PACWireless, EnGenius, RF Industries -- SW> We have a customer that said about 3 months ago they were not able to see SW> there point to point shot anymore on simple NMS or simple monitor. SW> Yesterday we went out there to see if we could fix there problem with no SW> luck. From there office you can see the APPO's on the tower, but you can not SW> see the office to the tower point to point. They seem to be invisible, you SW> can't ping them either. If you unplug either side of the point to point SW> from the switch and plug it directly into your laptop you can see the point SW> to point then but not the other 3 APPO's. Everything is set up correctly, SW> we tried it in wireless bridge mode, and APPO in AP mode - APPO in CB mode, SW> neither way made any difference, we double checked all the numbers and SW> everything is the way it is supposed to be. Everything works, I just don't SW> know why all of a sudden we can't ping the units or get into them remotely. SW> We also tried resetting them back to factory default and reprogramming them, SW> the only thing different from the 3 APPO's on the tower and the point to SW> point is the there is not WEP key in the point to point, but I don't think SW> that should make a difference in monitoring them or accessing them remotely. SW> Any help would be greatly appreciated. SW> Shane Warren SW> ATW Wireless SW> The PART-15.ORG smartBridges Discussion List SW> To Join: mailto:[EMAIL PROTECTED] (in the body type SW> subscribe smartBridges <yournickname> SW> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) SW> Archives: http://archives.part-15.org -- [This E-mail scanned for viruses by Declude Virus] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
