If Airbridge need a watchdog.... My guess is they will all need it. I would look into a CPE with watchdog feature. Lower-end tranzeo as problem, higher-end are apparently OK. Atmel as the watchdog feature.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Sent: Monday, November 24, 2003 6:17 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Tranzeo CPE / APPO Compatibility Tranzeo CPE's also have a severe problem with APPOs. According to Brent from Tranzeo, the problem should be corrected in the latest firmware. The problem as many have seen is that the unit stays associated, but goes to sleep and does not wake up without power cycling the unit. If you ping the client PC/router, the unit will not go to sleep, but to me this is a bandaid fix. I have not verified the new firmware as of yet. My few complaints about the TR-CPEs are the lack of site survey utility, and the lower power/rx sensitivity. In my opinion, they work fine for short clear line of sight shots. ----- Original Message ----- From: "Ian Ellison" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 24, 2003 5:07 PM Subject: [smartBridges] Tranzeo CPE / APPO Compatibility > Has anyone tried using the Tranzeo CPE units with an APPO? Due to the > way too many headaches I'm having with ABO's needing reset > (constantly), I am venturing out and trying some new CPE until (and > then, maybe) sB can get some issues resolved. I'm not even using APPO > at my next AP, but am using high-priced Alvarion equipment to test the > stability. However my other AP's are still running APPO's, so I'm > wondering if anyone else has tried this combination, or has any > opinions on the Tranzeo line of products. > > Thanks, > > Ian > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
